Daily Papers

Coding agents are increasingly used as iterative development partners, but most benchmarks still evaluate one specification followed by one final assessment. This leaves out a basic question: can an agent keep its own codebase working as requirements change? We introduce EvoCode-Bench, a benchmark of 26 stateful coding tasks and 227 evaluated rounds. Each task preserves the agent's workspace for 5-15 rounds, states requirements through observable behavior, and uses cumulative executable tests to check new requirements and still-active prior ones. We evaluate 13 coding agents with two metrics: MT@4, a four-attempt fail-stop multi-round score, and SR, a single-round score from a reference-completed prior state. For most agents, SR exceeds MT@4 by 22-40 points. The gap also changes rankings: the highest-SR agent (78.9) ranks only third in persistent execution (44.0 MT@4). Even the strongest agents achieve only about 50% success on multi-turn metrics, and aggregate pass rate drops below half of round-1 performance by round 5. Failure analysis shows tier-dependent behavior: weaker agents fail early, while stronger agents survive long enough to expose specification-tracking and regression failures. We release the benchmark data and Harbor multi-turn infrastructure.

When a professional web developer's code fails a test, they do not simply re-read the stack trace. They open the application in a browser, click buttons, inspect computed styles, and run diagnostic commands to understand what went wrong. Existing feedback mechanisms for coding agents rely on screenshots, LLM-as-a-judge scoring, or natural-language corrections, but few interact with the live application the way a developer would. We introduce WatchPoint, a simulated-user system that mimics real developer behavior by generating and executing diagnostic scripts against the running application, producing structured observations that guide the coding model's retry. Unlike prior approaches that target single-file edits or evaluate using non-executable metrics, we operate on Web-Bench, a benchmark of 50 multi-file web projects comprising 1,000 sequentially dependent tasks, verified by deterministic end-to-end tests. WatchPoint recovers 57.6% of the tasks it diagnoses, and a controlled user study confirms the simulation's realism: human testers achieve a comparable recovery rate (54.5%), providing evidence that automated diagnostic scripts can substitute for interactive human testing on sequential web development tasks. We further identify a pattern of capability gaps that governs when simulated-user feedback is helpful and when it should be withheld.

Software testing has progressed toward intelligent automation, yet current AI-based test generators still suffer from static, single-shot outputs that frequently produce invalid, redundant, or non-executable tests due to the lack of execution aware feedback. This paper introduces an agentic multi-model testing framework a closed-loop, self-correcting system in which a Test Generation Agent, an Execution and Analysis Agent, and a Review and Optimization Agent collaboratively generate, execute, analyze, and refine tests until convergence. By using sandboxed execution, detailed failure reporting, and iterative regeneration or patching of failing tests, the framework autonomously improves test quality and expands coverage. Integrated into a CI/CD-compatible pipeline, it leverages reinforcement signals from coverage metrics and execution outcomes to guide refinement. Empirical evaluations on microservice based applications show up to a 60% reduction in invalid tests, 30% coverage improvement, and significantly reduced human effort compared to single-model baselines demonstrating that multi-agent, feedback-driven loops can evolve software testing into an autonomous, continuously learning quality assurance ecosystem for self-healing, high-reliability codebases.

As production code evolves, the test suite must co-evolve to remain effective. Existing benchmarks for test evolution operate at method-level granularity with pre-paired inputs, bypassing the task of locating affected tests from the full project and excluding the need for new tests entirely. We present TEBench, the first project-level benchmark for test evolution. Given a project repository and a code-changing commit, TEBench requires systems to autonomously identify tests requiring modification, determine where new tests are needed, and produce the corresponding test patch. We construct TEBench through a four-stage pipeline over Defects4J projects, curating 314 task instances from 10 projects with developer-written ground truth. Each instance is annotated with one or more of three evolution types: Test-Breaking (tests that fail), Test-Stale (tests that pass but no longer meaningfully validate updated behavior), and Test-Missing (new tests needed for introduced behavior). We evaluate seven configurations spanning three industrial agent frameworks (Claude Code, Codex CLI, OpenCode) and six base models, alongside a heuristic baseline. All seven configurations converge on an identification F1 of 45.7% to 49.4%, revealing a shared performance ceiling across both frameworks and base models. Test-Stale is the most challenging type, averaging F1 around 36%, since configurations rely on execution failure signals and lack proactive semantic reasoning. On the update task, configurations produce highly executable test modifications whose surface form diverges substantially from ground truth. Trajectory analysis reveals a reactive "execute-fail-fix" loop that succeeds for breaking tests but structurally cannot address stale or missing tests. TEBench is available at https://github.com/iSEngLab/TEBench with a leaderboard at https://tebench-leadership.vercel.app.

We present RM-RF, a lightweight reward model for run-free evaluation of automatically generated unit tests. Instead of repeatedly compiling and executing candidate tests, RM-RF predicts - from source and test code alone - three execution-derived signals: (1) whether the augmented test suite compiles and runs successfully, (2) whether the generated test cases increase code coverage, and (3) whether the generated test cases improve the mutation kill rate. To train and evaluate RM-RF we assemble a multilingual dataset (Java, Python, Go) of focal files, test files, and candidate test additions labeled by an execution-based pipeline, and we release an associated dataset and methodology for comparative evaluation. We tested multiple model families and tuning regimes (zero-shot, full fine-tuning, and PEFT via LoRA), achieving an average F1 of 0.69 across the three targets. Compared to conventional compile-and-run instruments, RM-RF provides substantially lower latency and infrastructure cost while delivering competitive predictive fidelity, enabling fast, scalable feedback for large-scale test generation and RL-based code optimization.

Many popular programming languages, including C#, Java, and Python, support exceptions. Exceptions are thrown during program execution if an unwanted event happens, e.g., a method is invoked with an illegal argument value. Software developers write exceptional behavior tests (EBTs) to check that their code detects unwanted events and throws appropriate exceptions. Prior research studies have shown the importance of EBTs, but those studies also highlighted that developers put most of their efforts on "happy paths", e.g., paths without unwanted events. To help developers fill the gap, we present the first framework, dubbed exLong, that automatically generates EBTs. exLong is a large language model instruction-tuned from CodeLlama and embeds reasoning about traces that lead to throw statements, conditional expressions that guard throw statements, and non-exceptional behavior tests that execute similar traces. We compare exLong with the state-of-the-art models for test generation (CAT-LM) and one of the strongest foundation models (GPT3.5), as well as with analysis-based tools for test generation (Randoop and EvoSuite). Our results show that exLong outperforms existing models and tools. Furthermore, we contributed several pull requests to open-source projects and 23 EBTs generated by exLong were already accepted.

Working agents need to read diverse files, coordinate tools, and produce deliverables. Training such agents requires tasks built on many real files with verifiable results, but few pipelines exist to synthesize this kind of data. Existing pipelines either generate files with models, which lack realism and diversity, or build tasks on real files without task-specific verifiers, leaving result quality unchecked. We introduce GraphForge, an evidence-graph based framework that grounds both the task and its verification in real files. Starting from occupation-grounded seeds for controlled diversity, GraphForge assembles a workspace of real files for each seed and builds an evidence graph over their relations. Since the task statement and rubrics are both derived from this graph, task requirements are backed by the workspace files and each criterion is anchored to the files needed to verify it. An initial rollout further tests executability, and a revision agent repairs the task and rubrics against the original files before trajectories are collected. Fine-tuning Qwen3.6-27B on 2,169 GraphForge trajectories brings GDPVal to 1445.7 (+65.7) under OpenHands, and Workspace-Bench-Lite and SpreadsheetBench II to 63.7 (+7.7) and 24.0 (+13.7) under Claude Code. Rejection fine-tuning on the SFT model's own rollouts, with candidates selected by the evidence-anchored rubrics, yields further improvements on all three benchmarks, suggesting that the rubrics provide a useful selection signal. The data and models are available.

Scaling up executable code data is significant for improving language models' software engineering capability. The intricate nature of the process makes it labor-intensive, time-consuming and expert-knowledge-dependent to build a large number of executable code repositories, limiting the scalability of existing work based on running tests. The primary bottleneck lies in the automated building of test environments for different repositories, which is an essential yet underexplored task. To mitigate the gap, we introduce Repo2Run, the first LLM-based agent aiming at automating the building of executable test environments for any repositories at scale. Specifically, given a code repository, Repo2Run iteratively builds the Docker image, runs unit tests based on the feedback of the building, and synthesizes the Dockerfile until the entire pipeline is executed successfully. The resulting Dockerfile can then be used to create Docker container environments for running code and tests. We created a benchmark containing 420 Python repositories with unit tests for evaluation. The results illustrate that Repo2Run achieves an 86.0% success rate, outperforming SWE-agent by 77.0%. The resources of Repo2Run are available at https://github.com/bytedance/Repo2Run.

Fuzz testing is a fundamental technique employed to identify vulnerabilities within software systems. However, the process can be protracted and resource-intensive, especially when confronted with extensive codebases. In this work, I present FuzzDistill, an approach that harnesses compile-time data and machine learning to refine fuzzing targets. By analyzing compile-time information, such as function call graphs' features, loop information, and memory operations, FuzzDistill identifies high-priority areas of the codebase that are more probable to contain vulnerabilities. I demonstrate the efficacy of my approach through experiments conducted on real-world software, demonstrating substantial reductions in testing time.

Selecting LLM-generated code candidates using LLM-generated tests is challenging because the tests themselves may be incorrect. Existing methods either treat all tests equally or rely on ad-hoc heuristics to filter unreliable tests. Yet determining test correctness requires knowing which codes are correct, creating a circular dependency. Our key insight is that we need not determine test correctness at all: test votes should rank, not merely count. What matters is not how many codes pass a test, but whether the test can distinguish correct from incorrect code. We break the circular dependency via leave-one-out evaluation: hold out one test, rank codes by their aggregate scores on all remaining tests, and measure whether the held-out test's pass/fail pattern agrees with this ranking. We formalize this agreement as the leave-one-out AUC~(LOO-AUC) and prove that the expected LOO-AUC is proportional to each test's ability to separate correct code from incorrect code. Building on this, we propose ACES~(AUC ConsistEncy Scoring) with two complementary variants: ACES-C provides closed-form weights that provably approximate the oracle in expectation under a mild assumption on average test quality; ACES-O drops this assumption and iteratively optimizes a differentiable LOO-AUC objective. Both operate solely on the binary pass matrix with negligible overhead, and achieve state-of-the-art Pass@k on multiple code generation benchmarks.

Automated GUI testing is crucial for ensuring the quality and reliability of Android apps. However, the efficacy of existing UI testing techniques is often limited, especially in terms of coverage. Recent studies, including the state-of-the-art, struggle to achieve more than 30% activity coverage in real-world apps. This limited coverage can be attributed to a combination of factors such as failing to generate complex user inputs, unsatisfied activation conditions regarding device configurations and external resources, and hard-to-reach code paths that are not easily accessible through the GUI. To overcome these limitations, we propose CovAgent, a novel agentic AI-powered approach to enhance Android app UI testing. Our fuzzer-agnostic framework comprises an AI agent that inspects the app's decompiled Smali code and component transition graph, and reasons about unsatisfied activation conditions within the app code logic that prevent access to the activities that are unreachable by standard and widely adopted GUI fuzzers. Then, another agent generates dynamic instrumentation scripts that satisfy activation conditions required for successful transitions to those activities. We found that augmenting existing fuzzing approaches with our framework achieves a significant improvement in test coverage over the state-of-the-art, LLMDroid, and other baselines such as Fastbot and APE (e.g., 101.1%, 116.3% and 179.7% higher activity coverage, respectively). CovAgent also outperforms all the baselines in other metrics such as class, method, and line coverage. We also conduct investigations into components within CovAgent to reveal further insights regarding the efficacy of Agentic AI in the field of automated app testing such as the agentic activation condition inference accuracy, and agentic activity-launching success rate.

Recent advances in large language models for test case generation have improved branch coverage via prompt-engineered mutations. However, they still lack principled mechanisms for steering models toward specific high-risk execution branches, limiting their effectiveness for discovering subtle bugs and security vulnerabilities. We propose GLMTest, the first program structure-aware LLM framework for targeted test case generation that seamlessly integrates code property graphs and code semantics using a graph neural network and a language model to condition test case generation on execution branches. This structured conditioning enables controllable and branch-targeted test case generation, thereby potentially enhancing bug and security risk discovery. Experiments on real-world projects show that GLMTest built on a Qwen2.5-Coder-7B-Instruct model improves branch accuracy from 27.4% to 50.2% on TestGenEval benchmark compared with state-of-the-art LLMs, i.e., Claude-Sonnet-4.5 and GPT-4o-mini.

Coding-agent evaluation has progressed from resolving individual issues to carrying out long-horizon development, yet task completion is still largely assessed within a single codebase. In software ecosystems, many features and bug fixes require coordinated changes across multiple repositories. We introduce WideSWE to evaluate coding agents on such cross-repository tasks. Mining and reviewing changes across 103 software ecosystems yields 120 real-world tasks, balanced between 60 bug fixes and 60 features. We derive prompts from related issues and pull requests. We systematically review and adapt hidden tests to support diverse correct implementations while preserving required behavior and regression checks. Across seven agent configurations, full task success ranges from 10.83% to 42.50%, with the configuration pairing Codex CLI with GPT-5.6-sol achieving the highest rate. Trajectories show agents failing to identify necessary changes, recognizing changes but leaving them unfinished, or modifying the required repositories without fully satisfying the request. To examine whether working on one repository at a time can alleviate these difficulties, we compare it with joint execution under identical prompts. Independent execution mainly recovers omitted work and is less effective at correcting previously attempted but unsuccessful implementations. Joint execution can use information from related repositories to guide implementation and verification. Code is available at https://github.com/ZJU-ACES-ISE/WideSWE.

Turning ideas into full software projects from scratch has become a popular use case for language models. Agents are being deployed to seed, maintain, and grow codebases over extended periods with minimal human oversight. Such settings require models to make high-level software architecture decisions. However, existing benchmarks measure focused, limited tasks such as fixing a single bug or developing a single, specified feature. We therefore introduce ProgramBench to measure the ability of software engineering agents to develop software holisitically. In ProgramBench, given only a program and its documentation, agents must architect and implement a codebase that matches the reference executable's behavior. End-to-end behavioral tests are generated via agent-driven fuzzing, enabling evaluation without prescribing implementation structure. Our 200 tasks range from compact CLI tools to widely used software such as FFmpeg, SQLite, and the PHP interpreter. We evaluate 9 LMs and find that none fully resolve any task, with the best model passing 95\% of tests on only 3\% of tasks. Models favor monolithic, single-file implementations that diverge sharply from human-written code.

A fundamental skill among human developers is the ability to understand and reason about program execution. As an example, a programmer can mentally simulate code execution in natural language to debug and repair code (aka. rubber duck debugging). However, large language models (LLMs) of code are typically trained on the surface textual form of programs, thus may lack a semantic understanding of how programs execute at run-time. To address this issue, we propose NExT, a method to teach LLMs to inspect the execution traces of programs (variable states of executed lines) and reason about their run-time behavior through chain-of-thought (CoT) rationales. Specifically, NExT uses self-training to bootstrap a synthetic training set of execution-aware rationales that lead to correct task solutions (e.g., fixed programs) without laborious manual annotation. Experiments on program repair tasks based on MBPP and HumanEval demonstrate that NExT improves the fix rate of a PaLM 2 model, by 26.1% and 14.3% absolute, respectively, with significantly improved rationale quality as verified by automated metrics and human raters. Our model can also generalize to scenarios where program traces are absent at test-time.

The inherent rigidity of fixed-size benchmarks makes them an inefficient tool for model evaluation. Diverse evaluation objectives, including model ranking, model selection and testing throughout development, demand varying levels of statistical power. The mismatch between fixed sample sizes and these diverse needs results in either excessive computational cost or compromised reliability - a critical concern for model evaluation. To overcome these limitations, we call for adoption of sequential testing in our field. We provide an adaptive evaluation framework, that provides a principled way to navigate the trade-off between efficiency and reliability in model evaluation. Our framework combines the established statistical paradigm of sequential testing with stopping criteria tailored to common evaluation needs such as diminishing returns detection, and minimum detectable effect size. We demonstrate its ability to adaptively manage the efficiency-reliability trade-off on the Open VLM Leaderboard, including, for example, a 80% reduction in computational cost compared to fixed-size evaluation (with a 2.5-point CI width allowance) while maintaining statistical significance.

Testing is an integral part of the software development process. Yet, writing tests is time-consuming and therefore often neglected. Classical test generation tools such as EvoSuite generate behavioral test suites by optimizing for coverage, but tend to produce tests that are hard to understand. Language models trained on code can generate code that is highly similar to that written by humans, but current models are trained to generate each file separately, as is standard practice in natural language processing, and thus fail to consider the code-under-test context when producing a test file. In this work, we propose the Aligned Code And Tests Language Model (CAT-LM), a GPT-style language model with 2.7 Billion parameters, trained on a corpus of Python and Java projects. We utilize a novel pretraining signal that explicitly considers the mapping between code and test files when available. We also drastically increase the maximum sequence length of inputs to 8,192 tokens, 4x more than typical code generation models, to ensure that the code context is available to the model when generating test code. We analyze its usefulness for realistic applications, showing that sampling with filtering (e.g., by compilability, coverage) allows it to efficiently produce tests that achieve coverage similar to ones written by developers while resembling their writing style. By utilizing the code context, CAT-LM generates more valid tests than even much larger language models trained with more data (CodeGen 16B and StarCoder) and substantially outperforms a recent test-specific model (TeCo) at test completion. Overall, our work highlights the importance of incorporating software-specific insights when training language models for code and paves the way to more powerful automated test generation.

Software development requires more than editing code: developers repeatedly run software, interact with its interfaces, visually inspect its behavior, and use these observations to decide what to change next and whether a change works. Existing coding agents and computer-use agents are largely studied in isolation, leaving this integrated development process underexplored. Diagnosing a runtime interaction failure requires agents to connect visual observations with the responsible code, then use the application again to verify the repair. We introduce CUA-SWE, a benchmark, environment, and evaluation pipeline for software engineering with computer use. Beyond studying how GUI feedback supports diagnosis and repair, we ask whether agents can complete software engineering tasks when required specification or operational information is available only through the running application's visual interface. CUA-SWE spans four software engineering domains and requires agents to modify code and configuration, execute commands, interact with running software, and inspect visual feedback within the same task. Each task includes deterministic, task-specific tests that verify whether the resulting software satisfies the requirements and preserves specified behavior. Our evaluation characterizes how frontier agents combine source-level execution with application screenshots and graphical interaction to produce verified software changes. We examine performance across domains and task information requirements, alongside the development behaviors associated with successful repairs. CUA-SWE provides a unified testbed for studying how agents use visual feedback and interaction to guide software engineering, with executable correctness criteria for the resulting software.

The ability of CodeLLMs to generate executable and functionally correct code at the repository-level scale remains largely unexplored. We introduce RepoExec, a novel benchmark for evaluating code generation at the repository-level scale. RepoExec focuses on three main aspects: executability, functional correctness through automated test case generation with high coverage rate, and carefully crafted cross-file contexts to accurately generate code. Our work explores a controlled scenario where developers specify necessary code dependencies, challenging the model to integrate these accurately. Experiments show that while pretrained LLMs outperform instruction-tuned models in correctness, the latter excel in utilizing provided dependencies and demonstrating debugging capabilities. We also introduce a new instruction-tuned dataset that focuses on code dependencies and demonstrate that CodeLLMs fine-tuned on our dataset have a better capability to leverage these dependencies effectively. RepoExec aims to provide a comprehensive evaluation of code functionality and alignment with developer intent, paving the way for more reliable and applicable CodeLLMs in real-world scenarios. The dataset and source code can be found at~https://github.com/FSoft-AI4Code/RepoExec.

The executable harness surrounding a GUI model determines how observations are assembled, actions are executed, and verification, recovery, and termination are controlled. Compared with harness optimization for non-GUI agents, automatically optimizing this harness poses three coupled challenges: reconciling model intent with observed visual effects, diagnosing failures under variable execution outcomes, and identifying recurrent failure patterns across tasks and translating them into reusable runtime changes. We introduce GUI-HARVEST, an automatic harness optimizer that enables self-improving GUI agents with frozen backbone models. First, to ground diagnosis in observed action effects, it aligns model outputs and executed actions with before-and-after screenshots, tying findings to specific interface transitions. Second, to account for execution variability, it treats repeated runs of the same task as a joint evidence unit, using within-task comparisons to locate outcome-relevant behavioral differences. Third, it consolidates verified findings across tasks into recurring failure patterns, maps them to bounded source-code edits with predictions recorded before evaluation, and checks the predicted behavioral effects alongside task performance through repeated execution. Experiments on OSWorld-Verified show consistent held-out gains across six general-purpose open, GUI-specialized open, and proprietary backbone models; Qwen3-VL-32B-Instruct gains 12.33 points on the full suite. Frozen-harness transfer improves GPT-5 by 13.87 percentage points on WindowsAgentArena at 50 steps without further optimization. With the same backbone and initial harness, GUI-HARVEST outperforms Self-Harness and Meta-Harness, suggesting that GUI-specific diagnosis and validation help harness improvements generalize to unseen tasks. The code is available at https://github.com/GaryYang12345/GUI-HARVEST.

The behavior of an LLM agent is determined not only by the underlying model, but also by its harness: the executable program that constructs context, invokes tools, verifies intermediate results, and recovers from failures. Existing approaches optimize such harnesses before deployment, searching training or development data for a fixed agent workflow that is then frozen at test time. This limits adaptation when the test distribution, failure modes, or tool interactions differ from those seen during development. We ask whether the harness can instead be optimized during evaluation itself, using only the unlabeled execution traces the agent produces on the test inputs. We introduce Test-Time Harness Evolution (TTHE), which treats the executable harness as the state of test-time adaptation. During evaluation, TTHE maintains a population of candidate harnesses and refines them through an agentic proposer that reasons over their execution traces, without gold labels or task-specific supervision; a judge then commits an improved harness from execution-derived proxy signals, and the selected program persists to govern subsequent inputs. Crucially, TTHE does not update model weights, require gold labels, or train a separate adaptation model: solver, proposers, and judge are different roles and harnesses around the same frozen LLM, so all adaptation occurs through changes to the surrounding program. Across text-to-SQL, competitive programming, software engineering, data-science coding, and agentic tool-use tasks, TTHE improves fixed ReAct-style baseline harnesses, yielding persistent, inspectable improvements rather than a pre-searched workflow or per-query retries. These results recast test-time adaptation for LLM agents as evolution over executable control programs and identify execution-derived proxy reliability as a central challenge for robust unsupervised agent improvement.

The integration of AI-powered coding agents into Continuous Integration/Continuous Delivery (CI/CD) pipelines has fundamentally altered how software verification is conducted. While these agents successfully automate the test generation, current evaluation benchmarks (e.g., SWE-bench) largely focus on pass-rates rather than the intrinsic quality of the generated tests. This raises the possibility of "stealth technical debt", in which test suites pass execution but do not offer comprehensive coverage or semantic value. We address this methodological gap through a large-scale, empirical comparison of 204,673 test artifacts which comprises of 24,941 human-authored files and 179,732 agent-generated files; sourced from the AIDev dataset. Using the Abstract Syntax Tree (AST) parsing with Python's naive ast module, we implemented a "white-box" static analysis framework to evaluate three quality dimensions: Assertion Strength (RQ1), Edge-Case Coverage (RQ2), and Flakiness Potential (RQ3). Our results present a nuanced inversion of traditional assumptions. AI agents performed better than humans in Edge-Case Coverage, with almost twice the variety of boundary checks (Variety Score: 0.62 vs 0.32) and a higher frequency of null-safety testing (13.40% vs. 8.3%), even though human developers had a slight advantage in Assertion Strength (88.1% strong assertions vs. 85.37% for agents). But this thoroughness comes at a price: due mostly to their reliance on file I/O and non-deterministic logic, agent-generated tests exhibited a higher risk of flakiness (Candidate Rate: 0.41 vs. 0.30). These findings suggest that while AI agents excel at rigorous boundary testing, they lack the "environmental awareness" needed to write stable, hermetic tests.

Implementing automated unit tests is an important but time-consuming activity in software development. To assist developers in this task, many techniques for automating unit test generation have been developed. However, despite this effort, usable tools exist for very few programming languages. Moreover, studies have found that automatically generated tests suffer poor readability and do not resemble developer-written tests. In this work, we present a rigorous investigation of how large language models (LLMs) can help bridge the gap. We describe a generic pipeline that incorporates static analysis to guide LLMs in generating compilable and high-coverage test cases. We illustrate how the pipeline can be applied to different programming languages, specifically Java and Python, and to complex software requiring environment mocking. We conducted an empirical study to assess the quality of the generated tests in terms of code coverage and test naturalness -- evaluating them on standard as well as enterprise Java applications and a large Python benchmark. Our results demonstrate that LLM-based test generation, when guided by static analysis, can be competitive with, and even outperform, state-of-the-art test-generation techniques in coverage achieved while also producing considerably more natural test cases that developers find easy to understand. We also present the results of a user study, conducted with 161 professional developers, that highlights the naturalness characteristics of the tests generated by our approach.

Continuous Integration and Continuous Deployment (CI/CD) pipelines are central to modern software delivery, yet their static workflows often introduce inefficiencies as systems scale. This paper proposes a reinforcement learning (RL) based approach to dynamically optimize CI/CD pipeline workflows. The pipeline is modeled as a Markov Decision Process, and an RL agent is trained to make runtime decisions such as selecting full, partial, or no test execution in order to maximize throughput while minimizing testing overhead. A configurable CI/CD simulation environment is developed to evaluate the approach across build, test, and deploy stages. Experimental results show that the RL optimized pipeline achieves up to a 30 percent improvement in throughput and approximately a 25 percent reduction in test execution time compared to static baselines, while maintaining a defect miss rate below 5 percent. The agent learns to selectively skip or abbreviate tests for low risk commits, accelerating feedback cycles without significantly increasing failure risk. These results demonstrate the potential of reinforcement learning to enable adaptive and intelligent DevOps workflows, providing a practical pathway toward more efficient, resilient, and sustainable CI/CD automation.

Code translation is a crucial activity in the software development and maintenance process, and researchers have recently begun to focus on using pre-trained large language models (LLMs) for code translation. However, existing LLMs only learn the contextual semantics of code during pre-training, neglecting executability information closely related to the execution state of the code, which results in unguaranteed code executability and unreliable automated code translation. To address this issue, we propose ExeCoder, an LLM specifically designed for code translation, aimed at utilizing executability representations such as functional semantics, syntax structures, and variable dependencies to enhance the capabilities of LLMs in code translation. To evaluate the effectiveness of ExeCoder, we manually enhanced the widely used benchmark TransCoder-test, resulting in a benchmark called TransCoder-test-X that serves LLMs. Evaluation of TransCoder-test-X indicates that ExeCoder achieves state-of-the-art performance in code translation, surpassing existing open-source code LLMs by over 10.88% to 38.78% and over 27.44% to 42.97% on two metrics, and even outperforms the renowned closed-source LLM GPT-4o. Website: https://execoder4trans.github.io/

Software testing is a critical aspect of software development, yet generating test cases remains a routine task for engineers. This paper presents a benchmark, CLOVER, to evaluate models' capabilities in generating and completing test cases under specific conditions. Spanning from simple assertion completions to writing test cases that cover specific code blocks across multiple files, these tasks are based on 12 python repositories, analyzing 845 problems with context lengths ranging from 4k to 128k tokens. Utilizing code testing frameworks, we propose a method to construct retrieval contexts using coverage information. While models exhibit comparable performance with short contexts, notable differences emerge with 16k contexts. Notably, models like GPT-4o and Claude 3.5 can effectively leverage relevant snippets; however, all models score below 35\% on the complex Task III, even with the oracle context provided, underscoring the benchmark's significance and the potential for model improvement. The benchmark is containerized for code execution across tasks, and we will release the code, data, and construction methodologies.

Software testing is a crucial phase in the software life cycle, helping identify potential risks and reduce maintenance costs. With the advancement of Large Language Models (LLMs), researchers have proposed an increasing number of LLM-based software testing techniques, particularly in the area of test case generation. Despite the growing interest, limited efforts have been made to thoroughly evaluate the actual capabilities of LLMs in this task. In this paper, we introduce TestBench, a benchmark for class-level LLM-based test case generation. We construct a dataset of 108 Java programs from 9 real-world, large-scale projects on GitHub, each representing a different thematic domain. We then design three distinct types of prompts based on context descriptions, including self-contained context, full context, and simple context. Besides, we propose a fine-grained evaluation framework that considers five aspects of test cases: syntactic correctness, compilation correctness, test correctness, code coverage rate, and defect detection rate. Furthermore, we propose a heuristic algorithm to repair erroneous test cases generated by LLMs. We evaluate CodeLlama-13b, GPT-3.5, and GPT-4 on the TestBench, and our experimental results indicate that larger models demonstrate a greater ability to effectively utilize contextual information, thus generating higher-quality test cases. Smaller models may struggle with the noise introduced by the extensive information contained within the full context. However, when using the simplified version, namely the simple context, which is derived from the full context via abstract syntax tree analysis, the performance of these models improves significantly. Our analysis highlights the current progress and pinpoints future directions to further enhance the effectiveness of models by handling contextual information for test case generation.

LLM agents increasingly perform autonomous actions through external tools, leading to complex and evolving safety risks. However, existing safety testing targets expert-designed safety violations, and the corresponding outcomes are evaluated by hard-coded rules, making them costly to extend as agents evolve. To this end, we present Vera, an end-to-end automated safety testing framework that instantiates software engineering testing principles for non-deterministic agents through a three-stage, self-reinforcing pipeline. First, a literature-driven exploration continuously discovers and structures emerging risks into taxonomies of safety risks, attack methods, and tool execution environments. Second, combinatorial composition across taxonomy dimensions produces executable safety cases, each specifying a concrete safety goal, a programmatically constructed initial state, and a deterministic verification predicate grounded in observable artifacts. Third, adaptive execution runs heterogeneous agents in isolated sandboxes where a control agent steers multi-turn interaction based on runtime observations, while evidence-grounded verifiers judge outcomes from environment state and tool-call evidence rather than model self-report. We evaluate Vera on four production agent frameworks (OpenClaw, Hermes, Codex, Claude Code), revealing substantial safety weaknesses, with average attack success rates reaching 93.9\% under multi-channel attacks; we also release Vera-Bench, comprising 1600 executable safety cases spanning 124 risk categories across three execution settings. These results indicate that modular, executable testing infrastructure is essential for rigorous and maintainable safety evaluation of rapidly evolving agentic systems at scale. The code is publicly available at https://github.com/Yunhao-Feng/Vera.

In this paper we present a Java-to-Python (J2P) and Python-to-Java (P2J) back-to-back code translation method, and associated tool called CoTran, based on large language models (LLMs). Our method leverages the attention mechanism of LLMs, compilation, and symbolic execution-based test generation for equivalence testing between the input and output programs. More precisely, we modify the typical LLM training loop to incorporate compiler and symbolic execution loss. Via extensive experiments comparing CoTran with 10 other transpilers and LLM-based translation tools over a benchmark of more than 57,000 Java-Python equivalent pairs, we show that CoTran outperforms them on relevant metrics such as compilation and runtime equivalence accuracy. For example, our tool gets 97.43% compilation accuracy and 49.66% runtime equivalence accuracy for J2P translation, whereas the nearest competing tool only gets 96.44% and 6.8% respectively.

Automated vulnerability reproduction from CVE descriptions requires generating executable Proof-of-Concept (PoC) exploits and validating them in target environments. This process is critical in software security research and practice, yet remains time-consuming and demands specialized expertise when performed manually. While LLM agents show promise for automating this task, existing approaches often conflate exploring attack directions with fixing implementation details, which leads to unproductive debugging loops when reproduction fails. To address this, we propose CVE2PoC, an LLM-based dual-loop agent framework following a plan-execute-evaluate paradigm. The Strategic Planner analyzes vulnerability semantics and target code to produce structured attack plans. The Tactical Executor generates PoC code and validates it through progressive verification. The Adaptive Refiner evaluates execution results and routes failures to different loops: the Tactical Loop for code-level refinement, while the Strategic Loop for attack strategy replanning. This dual-loop design enables the framework to escape ineffective debugging by matching remediation to failure type. Evaluation on two benchmarks covering 617 real-world vulnerabilities demonstrates that CVE2PoC achieves 82.9% and 54.3% reproduction success rates on SecBench.js and PatchEval, respectively, outperforming the best baseline by 11.3% and 20.4%. Human evaluation confirms that generated PoCs achieve comparable code quality to human-written exploits in readability and reusability.

Fuzz testing, or "fuzzing," refers to a widely deployed class of techniques for testing programs by generating a set of inputs for the express purpose of finding bugs and identifying security flaws. Grey-box fuzzing, the most popular fuzzing strategy, combines light program instrumentation with a data driven process to generate new program inputs. In this work, we present a machine learning approach that builds on AFL, the preeminent grey-box fuzzer, by adaptively learning a probability distribution over its mutation operators on a program-specific basis. These operators, which are selected uniformly at random in AFL and mutational fuzzers in general, dictate how new inputs are generated, a core part of the fuzzer's efficacy. Our main contributions are two-fold: First, we show that a sampling distribution over mutation operators estimated from training programs can significantly improve performance of AFL. Second, we introduce a Thompson Sampling, bandit-based optimization approach that fine-tunes the mutator distribution adaptively, during the course of fuzzing an individual program. A set of experiments across complex programs demonstrates that tuning the mutational operator distribution generates sets of inputs that yield significantly higher code coverage and finds more crashes faster and more reliably than both baseline versions of AFL as well as other AFL-based learning approaches.

Vulnerabilities related to option combinations pose a significant challenge in software security testing due to their vast search space. Previous research primarily addressed this challenge through mutation or filtering techniques, which inefficiently treated all option combinations as having equal potential for vulnerabilities, thus wasting considerable time on non-vulnerable targets and resulting in low testing efficiency. In this paper, we utilize carefully designed prompt engineering to drive the large language model (LLM) to predict high-risk option combinations (i.e., more likely to contain vulnerabilities) and perform fuzz testing automatically without human intervention. We developed a tool called ProphetFuzz and evaluated it on a dataset comprising 52 programs collected from three related studies. The entire experiment consumed 10.44 CPU years. ProphetFuzz successfully predicted 1748 high-risk option combinations at an average cost of only \$8.69 per program. Results show that after 72 hours of fuzzing, ProphetFuzz discovered 364 unique vulnerabilities associated with 12.30\% of the predicted high-risk option combinations, which was 32.85\% higher than that found by state-of-the-art in the same timeframe. Additionally, using ProphetFuzz, we conducted persistent fuzzing on the latest versions of these programs, uncovering 140 vulnerabilities, with 93 confirmed by developers and 21 awarded CVE numbers.

Software development relies heavily on extensive unit testing, which makes the efficiency of automated Unit Test Generation (UTG) particularly important. However, most existing LLMs generate test cases one token at a time in each forward pass, which leads to inefficient UTG. Recently, diffusion LLMs (dLLMs) have emerged, offering promising parallel generation capabilities and showing strong potential for efficient UTG. Despite this advantage, their application to UTG is still constrained by a clear trade-off between efficiency and test quality, since increasing the number of tokens generated in each step often causes a sharp decline in the quality of test cases. To overcome this limitation, we present DiffTester, an acceleration framework specifically tailored for dLLMs in UTG. The key idea of DiffTester is that unit tests targeting the same focal method often share repetitive structural patterns. By dynamically identifying these common patterns through abstract syntax tree analysis during generation, DiffTester adaptively increases the number of tokens produced at each step without compromising the quality of the output. To enable comprehensive evaluation, we extend the original TestEval benchmark, which was limited to Python, by introducing additional programming languages including Java and C++. Extensive experiments on three benchmarks with two representative models show that DiffTester delivers significant acceleration while preserving test coverage. Moreover, DiffTester generalizes well across different dLLMs and programming languages, providing a practical and scalable solution for efficient UTG in software development. Code and data are publicly available at https://github.com/wellbeingyang/DLM4UTG-open .

Complex software systems develop over timescales that exceed the lifespan of any individual coding agent. Most agentic software systems preserve continuity through persistent sessions, memories, managers or shared context. We introduce EvoX Genesis (hereafter, Genesis), which instead makes the software project persistent while allowing local agents to remain finite-lived. Genesis represents software as a persistent recursive world: each local world is situated by an accepted version and a repository path, finite-lived agents propose local changes, recursive delegation moves work across paths, and only accepted consequences advance the persistent version history. We evaluate this organization across formation, continuation and redevelopment. Starting from a repository with no compiler implementation, Genesis used DeepSeek V4 Flash to build a Rust-based C compiler with about 250k tracked lines; the run lasted over 120 hours, archived over 1,000 agent episodes and incurred only US$44 in model-token charges. The compiler passed the complete c-testsuite and most LLVM and Csmith tests. In a separate compiler world generated with GLM 5.2, development continued after repeated agent replacement while retaining full test performance. Genesis also reimplemented 13 MESA modules with over 100k Fortran lines as a Rust workspace with nearly 90k Rust lines; across six numerical workloads, it achieved median speedups of 1.55--6.87x. These results show that long-horizon software development can be organized around a persistent project rather than a persistent agent.

Unit testing is essential in detecting bugs in functionally-discrete program units. Manually writing high-quality unit tests is time-consuming and laborious. Although traditional techniques can generate tests with reasonable coverage, they exhibit low readability and cannot be directly adopted by developers. Recent work has shown the large potential of large language models (LLMs) in unit test generation, which can generate more human-like and meaningful test code. ChatGPT, the latest LLM incorporating instruction tuning and reinforcement learning, has performed well in various domains. However, It remains unclear how effective ChatGPT is in unit test generation. In this work, we perform the first empirical study to evaluate ChatGPT's capability of unit test generation. Specifically, we conduct a quantitative analysis and a user study to systematically investigate the quality of its generated tests regarding the correctness, sufficiency, readability, and usability. The tests generated by ChatGPT still suffer from correctness issues, including diverse compilation errors and execution failures. Still, the passing tests generated by ChatGPT resemble manually-written tests by achieving comparable coverage, readability, and even sometimes developers' preference. Our findings indicate that generating unit tests with ChatGPT could be very promising if the correctness of its generated tests could be further improved. Inspired by our findings above, we propose ChatTESTER, a novel ChatGPT-based unit test generation approach, which leverages ChatGPT itself to improve the quality of its generated tests. ChatTESTER incorporates an initial test generator and an iterative test refiner. Our evaluation demonstrates the effectiveness of ChatTESTER by generating 34.3% more compilable tests and 18.7% more tests with correct assertions than the default ChatGPT.

Recent work on LLM-driven autonomous penetration testing reports promising results, but existing systems often bundle architectural, prompting, and tool-integration choices together. This makes it difficult to determine what is gained over a simple agent and harness. We present Cochise, a 630 LOC Python reference implementation for autonomous penetration-testing experiments. Cochise connects to a Linux execution host over SSH and supports attacking controlled target environments reachable from that jump host. The prototype implements a Planner--Executor architecture in which long-term state is maintained by the planner, while a ReAct-style executor issues commands over SSH and self-corrects based on command outputs. The scenario prompt can be adapted to different target environments. We evaluate the harness against a live third-party testbed, Game of Active Directory (GOAD). Cochise is intended not as a state-of-the-art penetration-testing agent, but as a reusable experimental infrastructure for comparing models, agent architectures, and penetration-testing traces. Alongside the prototype, we release replay and analysis tools: (i) cochise-replay for offline visualization of captured runs, (ii) cochise-analyze-logs and cochise-analyze-graphs for cost, token, duration, and compromise analysis, and (iii) a corpus of JSON trajectory logs from GOAD runs, so that researchers can study agent behavior without provisioning the 48--64 GB RAM / 190 GB storage testbed themselves. Tool demo video available at https://youtu.be/2mQimB1ufyI.

Context. Behaviour-Driven Development (BDD) software test suites accumulate duplicated step subsequences. Three published refactoring patterns are available (within-file Background, within-repo reusable-scenario invocation, cross-organisational shared higher-level step), but no prior work automates which recurring subsequences are worth extracting or which mechanism applies. Objective. Rank recurring step subsequences ("slices") by refactoring suitability (extraction-worthy), pre-map each to one of the three patterns, and quantify prevalence across the public BDD ecosystem. Method. Every contiguous L-step window (L in [2, 18]) in a 339-repository / 276-upstream-owner Gherkin corpus is keyed by paraphrase-robust cluster identifiers and counted under three scopes. Sentence-BERT (SBERT) / Uniform Manifold Approximation and Projection (UMAP) / Hierarchical Density-Based Clustering (HDBSCAN) recovers paraphrase-equivalent slices. Three authors label a stratified 200-slice pool against a written rubric. An eXtreme Gradient Boosting (XGBoost) extraction-worthy classifier trained under 5-fold cross-validation is compared with a tuned rule baseline and two open-weight Large Language Model (LLM) judges. Results. The miner produces 5,382,249 slices collapsing to 692,020 recurring patterns. Three-author Fleiss' kappa = 0.56 (extraction-worthy) and 0.79 (mechanism). The classifier reaches out-of-fold F1 = 0.891 (95% CI [0.852, 0.927]), outperforming both the rule baseline (F1 = 0.836, p = 0.017) and the better LLM judge (F1 = 0.728, p < 1e-4). 75.0%, 59.5%, and 11.7% of scenarios carry a within-file Background, within-repo reusable-scenario, or cross-organisational shared-step candidate. Conclusion. Paraphrase-robust subscenario discovery yields a corpus-wide census of BDD refactoring opportunities; pipeline, classifier predictions, labelled pool, and rubric are released under Apache-2.0.

Code LLMs still struggle with code execution reasoning, especially in smaller models. Existing methods rely on supervised fine-tuning (SFT) with teacher-generated explanations, primarily in two forms: (1) input-output (I/O) prediction chains and (2) natural-language descriptions of execution traces. However, intermediate execution steps cannot be explicitly verified during SFT, so the training objective can reduce to merely matching teacher explanations. Moreover, training data is typically collected without explicit control over task difficulty. We introduce ExecVerify, which goes beyond text imitation by incorporating verifiable white-box rewards derived from execution traces, including next-statement prediction and variable value/type prediction. Our work first builds a dataset with multiple difficulty levels via constraint-based program synthesis. Then, we apply reinforcement learning (RL) to reward correct answers about both intermediate execution steps and final outputs, aligning the training objective with semantic correctness at each execution step. Finally, we adopt a two-stage training pipeline that first enhances execution reasoning and then transfers to code generation. Experiments demonstrate that a 7B model trained with ExecVerify achieves performance comparable to 32B models on code reasoning benchmarks and improves pass@1 by up to 5.9\% on code generation tasks over strong post-training baselines.

Writing tests is a time-consuming yet essential task during software development. We propose to leverage recent advances in deep learning for text and code generation to assist developers in writing tests. We formalize the novel task of test completion to automatically complete the next statement in a test method based on the context of prior statements and the code under test. We develop TeCo -- a deep learning model using code semantics for test completion. The key insight underlying TeCo is that predicting the next statement in a test method requires reasoning about code execution, which is hard to do with only syntax-level data that existing code completion models use. TeCo extracts and uses six kinds of code semantics data, including the execution result of prior statements and the execution context of the test method. To provide a testbed for this new task, as well as to evaluate TeCo, we collect a corpus of 130,934 test methods from 1,270 open-source Java projects. Our results show that TeCo achieves an exact-match accuracy of 18, which is 29% higher than the best baseline using syntax-level data only. When measuring functional correctness of generated next statement, TeCo can generate runnable code in 29% of the cases compared to 18% obtained by the best baseline. Moreover, TeCo is significantly better than prior work on test oracle generation.

Bug validation asks a coding agent to produce an executable witness for a reported bug. The witness combines a concrete input with a testing harness and exposes faulty behavior during execution. Such evidence makes audit findings actionable, yet benchmark evaluation is difficult when cases reuse public historical bugs and witnesses or require manual construction. We present WitnessGym, an automated framework for constructing bug-validation benchmarks through bug injection. It injects bugs into test-reached paths of real projects, rebuilds each project, and retains cases exposed by a construction-time witness. Bug specifications and execution adapters allow extension to additional bug types and languages. Bug-preserving transformations vary the surrounding structure while preserving the witness behavior. Based on real-world Java projects with test suites, WitnessGym automatically constructs 1,300 benchmark cases. The injected patches resemble historical bug patches and are difficult for the two evaluated models to distinguish in blinded comparisons. We evaluate four coding agent frameworks in six framework/model pairings across bug types, execution contexts, and transformation depths. Witness construction remains difficult even when the bug pattern is known. Our framework, benchmark cases, and evaluation scripts are available.

Exploratory GUI testing is essential for software quality but suffers from high manual costs. While Multi-modal Large Language Model (MLLM) agents excel in navigation, they fail to autonomously discover defects due to two core challenges: Goal-Oriented Masking, where agents prioritize task completion over reporting anomalies, and Execution-Bias Attribution, where system defects are misidentified as agent errors. To address these, we first introduce GUITestBench, the first interactive benchmark for this task, featuring 143 tasks across 26 defects. We then propose GUITester, a multi-agent framework that decouples navigation from verification via two modules: (i) a Planning-Execution Module (PEM) that proactively probes for defects via embedded testing intents, and (ii) a Hierarchical Reflection Module (HRM) that resolves attribution ambiguity through interaction history analysis. GUITester achieves an F1-score of 48.90\% (Pass@3) on GUITestBench, outperforming state-of-the-art baselines (33.35\%). Our work demonstrates the feasibility of autonomous exploratory testing and provides a robust foundation for future GUI quality assurance~Our code is now available in~\href{https://github.com/ADaM-BJTU/GUITestBench{https://github.com/ADaM-BJTU/GUITestBench}}.

Verifying the success of computer use agent (CUA) trajectories is a critical challenge: without reliable verification, neither evaluation nor training signal can be trusted. In this paper, we present lessons learned from building a best-in-class verifier for web tasks we call the Universal Verifier. We design the Universal Verifier around four key principles: 1) constructing rubrics with meaningful, non-overlapping criteria to reduce noise; 2) separating process and outcome rewards that yield complementary signals, capturing cases where an agent follows the right steps but gets blocked or succeeds through an unexpected path; 3) distinguishing between controllable and uncontrollable failures scored via a cascading-error-free strategy for finer-grained failure understanding; and 4) a divide-and-conquer context management scheme that attends to all screenshots in a trajectory, improving reliability on longer task horizons. We validate these findings on CUAVerifierBench, a new set of CUA trajectories with both process and outcome human labels, showing that our Universal Verifier agrees with humans as often as humans agree with each other. We report a reduction in false positive rates to near zero compared to baselines like WebVoyager (geq 45\%) and WebJudge (geq 22\%). We emphasize that these gains stem from the cumulative effect of the design choices above. We also find that an auto-research agent achieves 70\% of expert quality in 5\% of the time, but fails to discover all strategies required to replicate the Universal Verifier. We open-source our Universal Verifier system along with CUAVerifierBench; available at https://github.com/microsoft/fara.

It is essential to detect functional differences in various software engineering tasks, such as automated program repair, mutation testing, and code refactoring. The problem of detecting functional differences between two programs can be reduced to searching for a difference exposing test (DET): a test input that results in different outputs on the subject programs. In this paper, we propose Mokav, a novel execution-driven tool that leverages LLMs to generate DETs. Mokav takes two versions of a program (P and Q) and an example test input. When successful, Mokav generates a valid DET, a test input that leads to different outputs on P and Q. Mokav iteratively prompts an LLM with a specialized prompt to generate new test inputs. At each iteration, Mokav provides execution-based feedback regarding previously generated tests until the LLM produces a DET. We evaluate Mokav on 1,535 pairs of Python programs collected from the Codeforces competition platform and 32 pairs of programs from the QuixBugs dataset. Our experiments show that Mokav outperforms the state-of-the-art, Pynguin and Differential Prompting, by a large margin. Mokav can generate DETs for 81.7% (1,255/1,535) of the program pairs in our benchmark (versus 4.9% for Pynguin and 37.3% for Differential Prompting). We demonstrate that all components in our system, including the iterative and execution-driven approaches, contribute to its high effectiveness.

As autonomous code agents move toward end-to-end software development, evaluating their practical autonomy becomes critical. Current benchmarks hide friction by testing agents in pre-configured environments, and their static evaluation pipelines frequently fail when parsing fully autonomous trajectories. We address these limitations with SWE-Cycle, a benchmark of 489 rigorously filtered instances. SWE-Cycle evaluates agents across three isolated tasks, including environment reconstruction, code implementation, and verification test generation, as well as an end-to-end FullCycle task that integrates all three. The FullCycle task requires agents to work autonomously in a bare repository without human scaffolding. To reliably assess these complex execution paths, we developed SWE-Judge. By combining static code review with dynamic testing, this execution-capable evaluation agent accurately verifies functional correctness and eliminates the systematic measurement errors of traditional static parsers. We evaluate code agents powered by six state-of-the-art LLMs across these four tasks. The results reveal a sharp drop in solve rates when transitioning from isolated tasks to FullCycle execution, exposing critical bottlenecks in handling cross-phase dependencies and maintaining code quality. Together, SWE-Cycle and SWE-Judge provide a comprehensive framework for accurately measuring the end-to-end capabilities of autonomous software agents.

Bug-fix benchmarks are fundamental in advancing various sub-fields of software engineering such as automatic program repair (APR) and fault localization (FL). A good benchmark must include recent examples that accurately reflect technologies and development practices of today. To be executable in the long term, a benchmark must feature test suites that do not degrade overtime due to, for example, dependencies that are no longer available. Existing benchmarks fail in meeting both criteria. For instance, Defects4J, one of the foremost Java benchmarks, last received an update in 2020. Moreover, full-reproducibility has been neglected by the majority of existing benchmarks. In this paper, we present GitBug-Actions: a novel tool for building bug-fix benchmarks with modern and fully-reproducible bug-fixes. GitBug-Actions relies on the most popular CI platform, GitHub Actions, to detect bug-fixes and smartly locally execute the CI pipeline in a controlled and reproducible environment. To the best of our knowledge, we are the first to rely on GitHub Actions to collect bug-fixes. To demonstrate our toolchain, we deploy GitBug-Actions to build a proof-of-concept Go bug-fix benchmark containing executable, fully-reproducible bug-fixes from different repositories. A video demonstrating GitBug-Actions is available at: https://youtu.be/aBWwa1sJYBs.

Agent Skills package procedural instructions and checks for use by general-purpose agents, but loading a skill does not guarantee that every requirement remains active throughout a long tool-using trajectory. We study this problem in a production-derived, white-box code-audit workflow. Holding the task and 24 artifact checks fixed, we vary the surrounding context and classify where failures first become visible: lost requirements, editing drift, failed checking, or non-agent evaluator/runtime failures. Codex with gpt-5.4-mini passes 8/10 runs in a 10,991-character clean context but only 3/10 in both a 299,140-character relevant context and an equal-length irrelevant context. This 50-percentage-point difference is large but remains trend-level under two-sided Fisher tests (p = 0.0698). Requirement coverage nevertheless stays above 92% in both long conditions, showing that a few omissions can invalidate an otherwise complete artifact. A second task passes all clean and long runs, so the evidence does not support a universal context-length threshold. A detailed external checklist passes 10/10 runs, compared with 5/10 for a generic self-check (p = 0.0325). Coding-agent scaffolds may help by selecting a smaller working set, but they do not eliminate failures. We do not introduce context rot or a new general monitoring method; we provide a bounded failure classification and empirical case study for white-box code auditing.

Software testing is a crucial aspect of software development, and the creation of high-quality tests that adhere to best practices is essential for effective maintenance. Recently, Large Language Models (LLMs) have gained popularity for code generation, including the automated creation of test cases. However, these LLMs are often trained on vast amounts of publicly available code, which may include test cases that do not adhere to best practices and may even contain test smells (anti-patterns). To address this issue, we propose a novel technique called Reinforcement Learning from Static Quality Metrics (RLSQM). To begin, we analyze the anti-patterns generated by the LLM and show that LLMs can generate undesirable test smells. Thus, we train specific reward models for each static quality metric, then utilize Proximal Policy Optimization (PPO) to train models for optimizing a single quality metric at a time. Furthermore, we amalgamate these rewards into a unified reward model aimed at capturing different best practices and quality aspects of tests. By comparing RL-trained models with those trained using supervised learning, we provide insights into how reliably utilize RL to improve test generation quality and into the effects of various training strategies. Our experimental results demonstrate that the RL-optimized model consistently generated high-quality test cases compared to the base LLM, improving the model by up to 21%, and successfully generates nearly 100% syntactically correct code. RLSQM also outperformed GPT-4 on four out of seven metrics. This represents a significant step towards enhancing the overall efficiency and reliability of software testing through Reinforcement Learning and static quality metrics. Our data are available at this link: https://figshare.com/s/ded476c8d4c221222849.

Testing is a core activity in software development workflows, and research on its automation has spanned several decades. Most existing approaches generate unit tests for individual methods, validate isolated API endpoints, or target user interface (UI) layers, with non-API and non-UI automated test generators typically exercising only a single focal method. Recent empirical evidence shows a substantial gap between such generated tests and developer-written ones, which often span multiple focal methods, involve complex call sequences, and contain elaborate assertions that current automated approaches fail to capture. To address this gap, we propose generating tests from natural language (NL) descriptions of developer intent. We present Sakura, the first agent-based framework for generating structurally complex test cases from NL descriptions. Sakura decomposes NL descriptions into structured blocks and processes them using a multi-agent system consisting of a localization agent that grounds test steps in concrete application code via static analysis, a composition agent that synthesizes compilable test code and iteratively refines it using execution feedback, and a supervisor agent that coordinates agent interactions. To evaluate Sakura, we curate a novel dataset of NL test descriptions at three levels of abstraction, systematically generated from developer-written tests mined from Apache Commons projects. Across 20 applications and 1,464 test scenarios, Sakura significantly outperforms off-the-shelf agentic tools such as Gemini CLI. Specifically, Sakura achieves 50-78% higher test compilability and 38-66% higher coverage overlap with ground-truth tests compared to baselines using the same models. Moreover, Sakura paired with small open-source models such as Devstral Small 2 and Qwen3-Coder outperforms Gemini CLI using large proprietary models, while also being more cost-effective.

The remarkable capability of large language models (LLMs) in generating high-quality code has drawn increasing attention in the software testing community. However, existing code LLMs often demonstrate unsatisfactory capabilities in generating accurate and complete tests since they were trained on code snippets collected without differentiating between code for testing purposes and other code. In this paper, we present a large-scale dataset UniTSyn, which is capable of enhancing the prowess of LLMs for Unit Test Synthesis. Associating tests with the tested functions is crucial for LLMs to infer the expected behavior and the logic paths to be verified. By leveraging Language Server Protocol, UniTSyn achieves the challenging goal of collecting focal-test pairs without per-project execution setups or per-language heuristics that tend to be fragile and difficult to scale. It contains 2.7 million focal-test pairs across five mainstream programming languages, making it possible to be utilized for enhancing the test generation ability of LLMs. The details of UniTSyn can be found in Table 1. Our experiments demonstrate that, by building an autoregressive model based on UniTSyn, we can achieve significant benefits in learning and understanding unit test representations, resulting in improved generation accuracy and code coverage across all evaluated programming languages. Code and data will be publicly available.

Agentic red-teaming benchmarks report whether an injected agent was compromised as a single bit: the attack succeeded, or it did not. We argue that this binary attack-success rate discards the information a defender most needs, namely how harmful the resulting action was. We introduce an action-graded harm rubric that scores an agent's tool-call trajectory on a seven-level ordinal scale (L0 to L6) according to whether the executed action was reversible, whether it crossed scope to reach another party, and whether it expanded privilege. We compute the scale two ways: a deterministic oracle that reads the trajectory and the attacker's stated goal, and a panel of three frontier language-model judges that read a tag-free account of the same trajectory. Across four victim models and two defenses on the AgentDojo workspace suite, severity grading exposes three cases the binary metric hides, including a defense that reports a zero attack-success rate while still permitting an externally visible cross-scope leak through an unfiltered tool. The judge panel reproduces the oracle with high ordinal agreement (Krippendorff's alpha = 0.91) but shares systematic blind spots that we characterize, most notably a failure to recognize escalation chains. Unlike prior work that provides harm taxonomies, harmful-task completion tests, execution-level safety benchmarks, or severity-aware simulation, our contribution is a reusable, trace-grounded severity instrument applied to the actual actions recorded in existing red-team logs. All code, prompts, and per-episode logs are released.

Code generation models can help improve many common software tasks ranging from code completion to defect prediction. Most of the existing benchmarks for code generation LLMs focus on code authoring or code completion. Surprisingly, there has been far less effort dedicated to benchmarking software testing, despite the strong correlation between well-tested software and effective bug detection. To address this gap, we create and release TestGenEval, a large-scale benchmark to measure test generation performance. Based on SWEBench, TestGenEval comprises 68,647 tests from 1,210 code and test file pairs across 11 well-maintained Python repositories. It covers initial tests authoring, test suite completion, and code coverage improvements. Test authoring simulates the process of a developer writing a test suite from scratch, while test completion mimics the scenario where a developer aims to improve the coverage of an existing test suite. We evaluate several popular models, with sizes ranging from 7B to 405B parameters. Our detailed analysis highlights TestGenEval's contribution to a comprehensive evaluation of test generation performance. In particular, models struggle to generate high-coverage test suites, with the best model, GPT-4o, achieving an average coverage of only 35.2%. This is primarily due to models struggling to reason about execution, and their frequent assertion errors when addressing complex code paths.

Benchmarks can run without determining what their results license. We freeze a large evaluation collection and attempt to replay its historical claims. Most units stop because the evidence required for replay is not bound. Where replay is possible, different claims remain stable at different resolutions. We make this otherwise implicit inference step explicit and executable.

Large reasoning models (LRMs) spend substantial test-time compute on long chain-of-thought (CoT) traces, but what *characterizes* an effective CoT remains unclear. While prior work reports gains from lengthening CoTs and increasing review (revisiting earlier steps) via appended *wait* tokens, recent studies suggest that shorter thinking can outperform longer traces. We therefore conduct a systematic evaluation across ten LRMs on math and scientific reasoning. Contrary to the "longer-is-better" narrative, we find that both naive CoT lengthening and increased review are associated with *lower* accuracy. As CoT unfolds step by step, token-level metrics can conflate verbosity with process quality. We introduce a graph view of CoT to extract structure and identify a single statistic-the *Failed-Step Fraction (FSF)*, the fraction of steps in abandoned branches-that consistently outpredicts length and review ratio for correctness across models. To probe causality, we design two interventions. First, we rank candidate CoTs by each metric at test time, where FSF yields the largest pass@1 gains; second, we edit CoTs to remove failed branches, which significantly improves accuracy, indicating that failed branches bias subsequent reasoning. Taken together, these results characterize effective CoTs as those that *fail less* and support *structure-aware* test-time scaling over indiscriminately generating long CoT.

Embedding-based code retrieval is a core component of coding agents and retrieval-augmented code generation, where retrieving correct code matters more than retrieving lexically similar code. Existing code-retrieval benchmarks do not plant controlled, execution-verified single-edit variants of each query's canonical implementation in the search pool, leaving the question of whether embeddings can functionally discriminate correct from near-clone-but-incorrect code unanswered in a retrieval setting. Resolving this requires a benchmark whose search pool itself contains the relevant counterfactuals -- execution-verified buggy variants near-identical to each canonical -- so that a retriever's rank ordering can be directly tested for functional discrimination rather than topical or identity overlap. We introduce ExecRetrieval, 939 Python tasks each paired with one execution-verified canonical implementation and up to four execution-verified buggy distractors, each generated by a mechanical mutation making a single targeted edit, and evaluate 23 dense embedding configurations plus BM25 under provider-native invocation with paired McNemar tests and query-level bootstrap intervals. With near-clone counterfactuals in the pool, the top hosted system reaches exec@10 = 1.00 but only exec@1 = 0.331; rank-1 misses are paired buggy variants 91.5-99.4% of the time across the four leading systems, and the canonical scores below at least one of its four paired distractors in 67-78% of queries on the leading systems. The full dataset, execution oracle, embedding matrices, environment snapshot, and pairwise statistical tests are released at the URL in Appendix D.

Recent studies have revealed that self-sustaining cascading failures in distributed systems frequently lead to widespread outages, which are challenging to contain and recover from. Existing failure detection techniques struggle to expose such failures prior to deployment, as they typically require a complex combination of specific conditions to be triggered. This challenge stems from the inherent nature of cascading failures, as they typically involve a sequence of fault propagations, each activated by distinct conditions. This paper presents CSnake, a fault injection framework to expose self-sustaining cascading failures in distributed systems. CSnake uses the novel idea of causal stitching, which causally links multiple single-fault injections in different tests to simulate complex fault propagation chains. To identify these chains, CSnake designs a counterfactual causality analysis of fault propagations - fault causality analysis (FCA): FCA compares the execution trace of a fault injection run with its corresponding profile run (i.e., same test w/o the injection) and identifies any additional faults triggered, which are considered to have a causal relationship with the injected fault. To address the large search space of fault and workload combinations, CSnake employs a three-phase allocation protocol of test budget that prioritizes faults with unique and diverse causal consequences, increasing the likelihood of uncovering conditional fault propagations. Furthermore, to avoid incorrectly connecting fault propagations from workloads with incompatible conditions, CSnake performs a local compatibility check that approximately checks the compatibility of the path constraints associated with connected fault propagations with low overhead. CSnake detected 15 bugs that cause self-sustaining cascading failures in five systems, five of which have been confirmed with two fixed.

Programmable logic controllers (PLCs) run industrial plants, and large language models can already generate independent program organization units (POUs) for them. Whether such logic integrates into an existing PLC project and then runs correctly has been checked only in limited tests. We present SemaPLC, a project-grounded and verification-gated agent harness assembled from conventional tools but governed by a strict completion rule. Rather than stopping when the model judges its own output adequate, SemaPLC declares a task complete only when logged external checks confirm it. Those checks cover the specification, the compilation, and the behavior on a live runtime. On 117 independent-POU tasks matching existing benchmarks, it attains the highest strict verified pass rate on all seven models (72.6\% mean). On a project-context track of 65 tasks whose generated logic must compile and run inside a real project, it attains the highest mean on integrated compilation, static behavior, and dynamic behavior. Of the three layers, dynamic behavior is the most revealing. We measure it by deploying the generated and the reference logic to a live PLC runtime and comparing their executed traces. All methods fall within 10 static points of one another, whereas dynamic scores separate them sharply, from 22.4 to 31.4 for the baselines against 52.2 for SemaPLC. Overall, our verification-gated harness raises the mean at every layer and most sharply at runtime. Execution, not static scoring, is the faithful test of whether generated control logic actually works. SemaPLC is open-sourced at https://github.com/midea-ai/SemaPLC.

Industrial advertising recommender systems are continually improved through architecture modifications, yet production iteration remains expert-intensive because coordinated changes to model topology, feature configuration, and interaction modules must satisfy strict interface, resource, and serving constraints. AutoML is limited to predefined search spaces, while generic coding agents verify runnability rather than recommender-specific semantic validity. Executable candidates may therefore violate architectural contracts, while the lack of structured reuse of semantic diagnostics and evaluation outcomes can lead to repeated invalid or ineffective modifications. We present NOVA, a verification-aware agent harness that organizes production architecture modification as multi-round search over concrete implementations within a fixed evaluation budget. At each round, NOVA generates multiple candidates under production constraints, rejects semantic violations, and ranks the valid survivors for local testing and offline evaluation. Across rounds, trajectory memory synthesizes semantic diagnostics, local-test outcomes, and offline metric changes into modification directions and forbidden patterns that guide subsequent search. Under the same maximum offline-evaluation budget for automated methods, NOVA achieves the highest effective pass rate, reaching 53.3% on ScaleUp and 51.7% on Literature-to-Production tasks. In a production A/B test covering 5% of traffic in an advertising system serving over one billion users, the selected Literature-to-Production candidate yields GMV gains of +1.25%, +1.70%, and +2.02% across three major pCVR objectives, with corresponding relative reductions in absolute pCVR bias of 58.8%, 66.7%, and 37.3%, respectively.

Software updates, including bug repair and feature additions, are frequent in modern applications but they often leave test suites outdated, resulting in undetected bugs and increased chances of system failures. A recent study by Meta revealed that 14%-22% of software failures stem from outdated tests that fail to reflect changes in the codebase. This highlights the need to keep tests in sync with code changes to ensure software reliability. In this paper, we present UTFix, a novel approach for repairing unit tests when their corresponding focal methods undergo changes. UTFix addresses two critical issues: assertion failure and reduced code coverage caused by changes in the focal method. Our approach leverages language models to repair unit tests by providing contextual information such as static code slices, dynamic code slices, and failure messages. We evaluate UTFix on our generated synthetic benchmarks (Tool-Bench), and real-world benchmarks. Tool- Bench includes diverse changes from popular open-source Python GitHub projects, where UTFix successfully repaired 89.2% of assertion failures and achieved 100% code coverage for 96 tests out of 369 tests. On the real-world benchmarks, UTFix repairs 60% of assertion failures while achieving 100% code coverage for 19 out of 30 unit tests. To the best of our knowledge, this is the first comprehensive study focused on unit test in evolving Python projects. Our contributions include the development of UTFix, the creation of Tool-Bench and real-world benchmarks, and the demonstration of the effectiveness of LLM-based methods in addressing unit test failures due to software evolution.

Tool-using AI agents are increasingly deployed across enterprise software systems, yet widely used benchmarks primarily evaluate nominal task completion, conflating baseline planning competence with operational fault recovery. We introduce UndoBench, a benchmark spanning 36 base workflows and 36 fault scenarios across 8 enterprise domains, decoupling task competence from recovery capability via counterfactual paired trials under identical seeds alongside wire-level effect-history and environment-state oracles. On 12 held-out TEST workflows across two open-weight models, two frameworks, and three recovery paradigms (5,760 executions / 2,880 paired trials) in the frozen lost-acknowledgment study, nominal competence reached 83.54% while conditional recovery success rate (CRSR) fell to 46.72%, with naive retry producing duplicate external effects in 53.33% of trials. Extensions to commercial API models reproduced this competence-recovery separation. Evaluations across complementary execution boundaries show that recovery is phase-dependent: before mutation, methods perform similarly without duplicate effects among capable trials; during partial mutation, naive retry, per-call idempotency, and zero-privilege journaling collapse on the evaluated composite workflows; after commit but before acknowledgment, verification and server-side idempotency substantially improve safety. These findings demonstrate that evaluating nominal completion alone masks critical, phase-dependent recovery vulnerabilities in autonomous agents.

Unit tests play a key role in ensuring the correctness of software. However, manually creating unit tests is a laborious task, motivating the need for automation. Large Language Models (LLMs) have recently been applied to this problem, utilizing additional training or few-shot learning on examples of existing tests. This paper presents a large-scale empirical evaluation on the effectiveness of LLMs for automated unit test generation without additional training or manual effort, providing the LLM with the signature and implementation of the function under test, along with usage examples extracted from documentation. We also attempt to repair failed generated tests by re-prompting the model with the failing test and error message. We implement our approach in TestPilot, a test generation tool for JavaScript that automatically generates unit tests for all API functions in an npm package. We evaluate TestPilot using OpenAI's gpt3.5-turbo LLM on 25 npm packages with a total of 1,684 API functions. The generated tests achieve a median statement coverage of 70.2% and branch coverage of 52.8%, significantly improving on Nessie, a recent feedback-directed JavaScript test generation technique, which achieves only 51.3% statement coverage and 25.6% branch coverage. We also find that 92.8% of TestPilot's generated tests have no more than 50% similarity with existing tests (as measured by normalized edit distance), with none of them being exact copies. Finally, we run TestPilot with two additional LLMs, OpenAI's older code-cushman-002 LLM and the open LLM StarCoder. Overall, we observed similar results with the former (68.2% median statement coverage), and somewhat worse results with the latter (54.0% median statement coverage), suggesting that the effectiveness of the approach is influenced by the size and training set of the LLM, but does not fundamentally depend on the specific model.

Training terminal agents requires scalable executable supervision, yet synthesizing high-quality terminal tasks remains challenging. Each task couples an instruction, an initialized environment, a reference solution, and an executable verifier; if these artifacts are generated from inconsistent assumptions, the resulting task may be unsolvable or incorrectly evaluated. Meanwhile, multi-stage synthesis can discard the goals, dependencies, state transitions, and procedural constraints encoded in the original sources. We present FACET (Fine-grained Agentic Construction of Executable Tasks), a framework that addresses both information preservation and cross-artifact consistency. FACET reconstructs related agent skills into coherent, information-rich scenarios, then realizes and repairs the execution environment before generating the final task artifacts. The resulting container state serves as shared grounding for the instruction, solution, and verifier, while execution-based validation and targeted repair correct artifact-specific failures without unnecessarily regenerating valid components. FACET produces complex terminal tasks with dense executable checks, and successful trajectories collected from these tasks provide effective, data-efficient supervision. Fine-tuning models across multiple scales consistently improves performance on Terminal-Bench 2.1, while analyses of alternative generation schemes support the importance of environment-grounded construction for task validity and solution-verifier alignment. These results establish source-intent preservation and shared executable-state grounding as key principles for scalable terminal-task synthesis.

This paper reports a single, fully instrumented case study of a large-scale architectural refactoring by an AI coding agent under a specification-first protocol, with no human review of the generated code and no pre-existing oracle to validate the target behaviour. The task, dismantling a central invariant across a large interdependent codebase, was assessed by the author as effectively infeasible through incremental refactoring, the kind of change that conventionally calls for a rewrite instead. Under the protocol described here, the agent completed it successfully. The system is a 717,725-line production TypeScript application across 3,648 files. The task required dismantling a core lifetime invariant: the guarantee that a UI panel remains open for the duration of an AI request. The target behaviour was that a streaming generation survives the closing of its panel and can be reattached, on reopening, to the same live stream with no loss or duplication. The protocol: formal specification by the agent, 14 refinement cycles auditing that specification against the source code, atomic implementation, a compile/test feedback loop, then 17 verification cycles auditing the code against the frozen specification. Across 31 audit passes, 201 defects were corrected before any human executed the program. The convergence criterion was empirical: two consecutive verification passes returning zero findings. The change touched 189 files (31 new); with the extraction phase, the two commits total 288 files, 34,770 insertions, 16,422 deletions. Across the first and roughly thirty later sessions, the software behaved as specified, no bug observed. Elapsed: three days; cost: USD 2,430. The full specification and raw session logs, 1,500+ pages in French, are published as evidence, allowing inspection of the process and submission to a language model for consistency checking.

Large language model agents increasingly act through terminals, yet existing surveys disperse terminal-mediated behavior across software engineering, tool use, and computer-use research. We regard terminal agents as systems whose dominant progress-bearing action--observation loop is mediated by terminal command execution, textual feedback, and stateful environment interaction. Using terminal-mediated execution as an organizing lens, this survey establishes workload-level boundaries and connects system architecture, competence acquisition, and evaluation through a seven-dimensional terminal competence profile. Our synthesis shows that realized behavior is jointly shaped by the model, interface, harness, runtime, and environment. Executable trajectories ground learning in action consequences, verification, and recovery, whereas prevailing evaluations emphasize final outcomes and expose process quality, recovery, and governance unevenly. Bounded fixed-condition diagnostics illustrate two implications: benchmark families expose different process signals, and matched system comparisons reveal benchmark-dependent performance and limits of component attribution. These findings motivate explicit reporting of system and runtime conditions, supported by replayable traces and process-level evidence. The framework provides a unified basis for studying terminal-mediated agency across software engineering and emerging application domains.

Automated test generation holds great promise for alleviating the burdens of manual test creation. However, existing search-based techniques compromise on test readability, while LLM-based approaches are prohibitively expensive in practice. We present TestForge, an agentic unit testing framework designed to cost-effectively generate high-quality test suites for real-world code. Our key insight is to reframe LLM-based test generation as an iterative process. TestForge thus begins with tests generated via zero-shot prompting, and then continuously refines those tests based on feedback from test executions and coverage reports. We evaluate TestForge on TestGenEval, a real world unit test generation benchmark sourced from 11 large scale open source repositories; we show that TestForge achieves a pass@1 rate of 84.3%, 44.4% line coverage and 33.8% mutation score on average, outperforming prior classical approaches and a one-iteration LLM-based baseline. TestForge produces more natural and understandable tests compared to state-of-the-art search-based techniques, and offers substantial cost savings over LLM-based techniques (at $0.63 per file). Finally, we release a version of TestGenEval integrated with the OpenHands platform, a popular open-source framework featuring a diverse set of software engineering agents and agentic benchmarks, for future extension and development.

We study whether demonstration-curation metrics that detect defective training episodes also improve the downstream behavior-cloning policy that trains on the curated data. On a contact-rich LIBERO pick-and-place benchmark with a controlled structural defect (early gripper release during the carry phase), we find that the two quantities are sharply decoupled. The metric with the highest defect-detection AUROC (0.804) produces the worst curated policy (13.3% task success), while a metric with a substantially lower AUROC (0.638) produces a policy that nearly matches the oracle trained on ground-truth clean data (90.0% vs. 93.3%). We further show that five of the seven metrics we evaluate exploit episode length as a trivial proxy for the defect label, a confound that inflates reported AUROCs to near-perfect values and disappears once episode length is controlled. Across all conditions, the contaminated baseline succeeds on only 3.3% of rollouts, and the two best curation methods close this to within 3 percentage points of the 93.3% oracle ceiling. Our results argue that curation methods should be evaluated by the policy they produce, not the defects they flag, and that any curation benchmark must control for episode length before reporting detection accuracy. We release the testbed, all metric implementations, and the evaluation pipeline.

Large language models (LLMs) have made remarkable progress in code generation, but competitive programming remains a challenge. Recent training-based methods have improved code generation by using reinforcement learning (RL) with execution feedback. The more recent framework CURE further incorporates test generation into the training process, jointly training a Coder and a Tester within a single model. At inference time, the Coder generates many candidate programs, and the Tester generates tests from the problem description. The candidate who passes the most of the generated tests is selected as the final answer. However, CURE has two critical limitations. First, the Tester never reads any candidate code, so its tests often fail to expose implementation-specific bugs. Second, the Coder generates every candidate from scratch and never learns to fix a buggy program based on a failed test. To address these limitations, we propose FixAudit, which approaches competitive code generation from a new perspective: starting from a single initial candidate, it iteratively improves the candidate through a targeted test-and-repair debugging cycle. The framework trains one shared model with two specialized roles through four stages: the Fixer, which repairs the current candidate based on a failing test, and the Auditor, which reads the candidate code to generate new tests that expose its remaining bugs. We evaluate FixAudit on three benchmarks: APPS, CodeContests, and xCodeEval. Applied to a 7B model, the framework surpasses the average performance of the larger 32B baseline within the same model family under the zero-shot setting. Compared to strong baselines built on the same 7B base model, FixAudit improves average Pass@1 by 35.1% to 36.8% and average AvgPassRatio by 7.1% to 24.5%.

Pre-trained large language models (LLMs) have recently emerged as a breakthrough technology in natural language processing and artificial intelligence, with the ability to handle large-scale datasets and exhibit remarkable performance across a wide range of tasks. Meanwhile, software testing is a crucial undertaking that serves as a cornerstone for ensuring the quality and reliability of software products. As the scope and complexity of software systems continue to grow, the need for more effective software testing techniques becomes increasingly urgent, and making it an area ripe for innovative approaches such as the use of LLMs. This paper provides a comprehensive review of the utilization of LLMs in software testing. It analyzes 52 relevant studies that have used LLMs for software testing, from both the software testing and LLMs perspectives. The paper presents a detailed discussion of the software testing tasks for which LLMs are commonly used, among which test case preparation and program repair are the most representative ones. It also analyzes the commonly used LLMs, the types of prompt engineering that are employed, as well as the accompanied techniques with these LLMs. It also summarizes the key challenges and potential opportunities in this direction. This work can serve as a roadmap for future research in this area, highlighting potential avenues for exploration, and identifying gaps in our current understanding of the use of LLMs in software testing.

The emergence of Large Language Models (LLMs) has catalyzed a paradigm shift in programming, giving rise to "vibe coding", where users can build complete projects and even control computers using natural language instructions. This paradigm has driven automated webpage development, but it introduces a new requirement about how to automatically verify whether the web functionalities are reliably implemented. Existing works struggle to adapt, relying on static visual similarity or predefined checklists that constrain their utility in open-ended environments. Furthermore, they overlook a vital aspect of software quality, namely latent logical constraints. To address these gaps, we introduce WebTestBench, a benchmark for evaluating end-to-end automated web testing. WebTestBench encompasses comprehensive dimensions across diverse web application categories. We decompose the testing process into two cascaded sub-tasks, checklist generation and defect detection, and propose WebTester, a baseline framework for this task. Evaluating popular LLMs with WebTester reveals severe challenges, including insufficient test completeness, detection bottlenecks, and long-horizon interaction unreliability. These findings expose a substantial gap between current computer-use agent capabilities and industrial-grade deployment demands. We hope that WebTestBench provides valuable insights and guidance for advancing end-to-end automated web testing. Our dataset and code are available at https://github.com/friedrichor/WebTestBench.

Code generation models have shown significant potential for programming tasks. However, existing training methods like supervised fine-tuning face key limitations: they do not effectively teach models to prioritize correct over incorrect solutions in ambiguous situations, nor do they effectively optimize the runtime efficiency of the generated code. To address these challenges, we propose CodeDPO, a framework that integrates preference learning into code generation to improve two key code preference factors: code correctness and efficiency. CodeDPO employs a novel dataset construction method, utilizing a self-generation-and-validation mechanism that simultaneously generates and evaluates code and test cases. The underlying assumption is that test cases executable by multiple code snippets provide more reliable validation, and code that passes more tests is more likely to be correct. Through this self-validation process, our PageRank-inspired algorithm iteratively updates the ranking score of each code snippet, ultimately creating a code preference optimization dataset based on correctness and efficiency. CodeDPO is flexible and scalable, generating diverse preference optimization data without depending on external resources. Through comprehensive evaluations of five widely used benchmarks, CodeDPO demonstrates significant improvements in correctness and efficiency compared to existing methods. Our experiments prove that CodeDPO enhances the capabilities of LLMs in code generation and provides a robust foundation for conducting code preference optimization in more complex and challenging real-world scenarios.

Binary decompilation is fundamental to security tasks such as vulnerability discovery, malware inspection, and executable-only program understanding. Recent LLM-based decompilation methods have shown promising results, but most still follow a single-turn generation paradigm: given assembly code or decompiler-produced pseudo-code, the model generates one output and stops. Consequently, the generated code may appear readable or even compile successfully, yet still deviate from the behavior of the original binary and mislead downstream analysis. This paper presents AutoDecompiler, a decompilation-specialized LLM trained with reinforcement learning for feedback-driven multi-turn binary decompilation. Instead of treating decompilation as one-shot code generation, AutoDecompiler formulates it as an iterative refinement process, where the model revises generated code based on compilation, execution, and input/output testing feedback. To enable this process, we design decompilation-specific rewards that capture code validity, recompilability, execution consistency, and semantic fidelity. We further construct stage-aware diagnostic feedback from compiler errors, execution failures, and failed test cases, and introduce progress-aware trajectory rewarding and turn-aware advantage reweighting to encourage beneficial revisions while suppressing regressions. We train the AutoDecompiler family and evaluate it across different input settings, model scales, and benchmarks. Experimental results show that AutoDecompiler consistently outperforms its single-turn counterparts under the same model size and input setting, achieving clear improvements in behavioral re-executability. These results demonstrate that learning to exploit program feedback with reinforcement learning is an effective direction for improving the functional correctness of LLM-based binary decompilation.

While Large Language Models (LLMs) have substantially advanced text-to-code synthesis, many real programming tasks specify intent through visual artifacts such as screenshots, charts, vector drawings, videos, and interactive states. These tasks require models to connect visual perception to executable programs, because correctness depends not only on syntax but also on layout, data semantics, interaction behavior, and domain-specific constraints that apply after execution. This survey examines Multimodal Code Intelligence, covering systems that generate, edit, refine, or reason with code under visually grounded inputs and outputs. We first formulate the field by the role that code plays in each task, distinguishing code as a rendered artifact, an editable symbolic structure, a scientific representation, an intermediate reasoning trace, or an executable policy or tool interface. We then organize benchmarks and methods into four domains: Graphical User Interface, Scientific Visualization, Structured Graphics, and Frontier Tasks and Frameworks. This taxonomy connects mature artifact-generation problems to emerging agentic and unified settings and allows us to compare how different tasks treat evidence of correctness. Looking ahead, we argue that future research may benefit from four verification-centered directions. Multi-signal validation can combine complementary evidence of correctness, multi-state verification can test behavior across execution trajectories, cross-task transfer testing can probe reusable visual-code skills, and verifiable agent traces can reveal whether agent actions are grounded in visual evidence. Together, these directions may move this field from single-output imitation toward evidence-grounded executable systems. An ongoing project and resources are available on https://github.com/xjywhu/Awesome-Multimodal-LLM-for-Code{GitHub}.

Large Language Models (LLMs) have been increasingly used to optimize code efficiency. Evaluating their effectiveness and further suggesting optimization opportunities often rely on high-quality tests to demonstrate the performance bottlenecks presented in the program. However, existing approaches rely on a limited set of hand-curated inputs or LLM-generated uninteresting length-stressing tests, failing to reveal more nuanced optimization opportunities. We present WEDGE, a framework for generating performance-stressing input given the program under test. WEDGE synthesizes explicit performance-characterizing constraints in the form of branch conditions to partition the programs' execution space into performance-specific regions. When integrated with the coverage-guided fuzzer, reaching different regions introduces explicit rewards for test generation to explore inefficient implementations. Our evaluation shows that WEDGE introduces a significant slowdown compared to the tests in CodeContests and those claimed to be optimized by existing approaches. From the utility perspective, integrating our tests substantially improves the existing code optimization approaches that rely on test-driven execution feedback. We release PERFFORGE, the performance tests generated by WEDGE, to benchmark future approaches for efficient code generation at https://github.com/UChiSeclab/perfforge.

Automated Test Case Generation (ATCG) is crucial for evaluating software reliability, particularly in competitive programming where robust algorithm assessments depend on diverse and accurate test cases. However, existing ATCG methods often fail to meet complex specifications or generate effective corner cases, limiting their utility. In this work, we introduce Context-Free Grammars with Counters (CCFGs), a formalism that captures both syntactic and semantic structures in input specifications. Using a fine-tuned CodeT5 model, we translate natural language input specifications into CCFGs, enabling the systematic generation of high-quality test cases. Experiments on the CodeContests dataset demonstrate that CCFG-based test cases outperform baseline methods in identifying incorrect algorithms, achieving significant gains in validity and effectiveness. Our approach provides a scalable and reliable grammar-driven framework for enhancing automated competitive programming evaluations.

The task of generating code solutions for a given programming problem can benefit from the use of pre-trained language models such as Codex, which can produce multiple diverse samples. However, a major challenge for this task is to select the most appropriate solution from the multiple samples generated by the pre-trained language models. A natural way to evaluate the quality and correctness of a code solution is to run it against a set of test cases, but the manual creation of such test cases is often costly and time-consuming. In this paper, we propose a novel method, CodeT, that leverages the same pre-trained language models to automatically generate test cases for the code samples, thus reducing the human effort and increasing the coverage of the test scenarios. CodeT then executes the code samples using the generated test cases, and performs a dual execution agreement, which considers both the consistency of the outputs against the generated test cases and the agreement of the outputs with other code samples. We conduct comprehensive experiments on four benchmarks, HumanEval, MBPP, APPS and CodeContests, using five different pre-trained language models with varying sizes and capabilities. Our results show that CodeT can significantly improve the performance of code solution selection over previous methods, achieving remarkable and consistent gains across different models and benchmarks. For instance, CodeT improves the pass@1 metric on HumanEval to 65.8%, which represents an absolute improvement of 18.8% over the code-davinci-002 model, and an absolute improvement of more than 20% over the previous state-of-the-art results.

Coding agents often finish a session by returning one squashed patch that mixes feature implementation, bug fixes, refactorings, tests, and configuration edits. While the final code may be correct, collapsing unrelated edits into one patch removes the history structure needed for review, selective revert, and later maintenance. We study retrospective commit-history reconstruction: given a completed squashed change, an agent groups its hunks into commits and materializes a replayable commit sequence. We formalize the task as hunk-to-commit partitioning with a replay requirement and build AtomicCommitBench, containing 800 real consecutive-commit episodes from 10 Python projects. Because multiple decompositions may be reasonable, we evaluate outputs using complementary metrics: PPAR for replay validity, ARI for reference-based grouping quality, and TCR for failure containment on scoreable modified-test episodes. Natural retrospective reconstruction proves substantially harder than replay checking or synthetic tangling. Although nearly all non-random methods achieve replay validity (PPAR >= 0.988), grouping quality ranges from 0.03 to 0.46 ARI. Matched synthetic composites are much easier than real same-author squashed diffs (+0.333 ARI). In our evaluation, the GPT-5.4 setup driven by Codex CLI (0.46 ARI) and the GLM-5 setup driven by Claude Code (0.43 ARI) outperform MiniMax (0.31) and Kimi (0.29). Qualitative analysis identifies same-file lumping and support-hunk drift as recurring failure modes. Dependency-Aware Commit Evidence (DACE) improves the lower-scoring setups by 0.05 to 0.08 ARI, indicating that dependency cues and hunk-role information help agents avoid locality-driven grouping errors. AtomicCommitBench enables evaluation of the commit histories produced by coding agents alongside the final code.

Software vulnerabilities are often detected via taint analysis, penetration testing, or fuzzing. They are also found via unit tests that exercise security-sensitive behavior with specific inputs, called vulnerability-witnessing tests. Generative AI models could help developers in writing them, but they require many examples to learn from, which are currently scarce. This paper introduces VuTeCo, an AI-driven framework for collecting examples of vulnerability-witnessing tests from Java repositories. VuTeCo carries out two tasks: (1) The "Finding" task to determine whether a unit test case is security-related, and (2) the "Matching" task to relate a test case to the vulnerability it witnesses. VuTeCo addresses the Finding task with UniXcoder, achieving an F0.5 score of 0.73 and a precision of 0.83 on a test set of unit tests from Vul4J. The Matching task is addressed using DeepSeek Coder, achieving an F0.5 score of 0.65 and a precision of 0.75 on a test set of pairs of unit tests and vulnerabilities from Vul4J. VuTeCo has been used in the wild on 427 Java projects and 1,238 vulnerabilities, obtaining 224 test cases confirmed to be security-related and 35 tests correctly matched to 29 vulnerabilities. The validated tests were collected in a new dataset called Test4Vul. VuTeCo lays the foundation for large-scale retrieval of vulnerability-witnessing tests, enabling future AI models to better understand and generate security unit tests.

Existing code reasoning methods primarily supervise final code outputs, ignoring intermediate states, often leading to reward hacking where correct answers are obtained through inconsistent reasoning. We propose StepCodeReasoner, a framework that introduces explicit intermediate execution-state supervision. By automatically inserting structured print-based execution-trace anchors into code, the model is trained to predict runtime states at each step, transforming code reasoning into a verifiable, stepwise execution modeling problem. Building on this execution-aware method, we introduce Bi-Level GRPO, a reinforcement learning algorithm for structured credit assignment at two levels: inter-trajectory, comparing alternative execution paths, and intra-trajectory, rewarding intermediate accuracy based on its impact on downstream correctness. Extensive experiments demonstrate that StepCodeReasoner achieves SOTA performance in code reasoning. In particular, our 7B model achieves 91.1\% on CRUXEval and 86.5\% on LiveCodeBench, outperforming the CodeReasoner-7B baseline (86.0\% and 77.7\%) and GPT-4o (85.6\% and 75.1\%). Furthermore, on the execution-trace benchmark REval, our model scores 82.9\%, outperforming baseline CodeReasoner-7B (72.3\%), its 14B counterpart (81.1\%), and GPT-4o (77.3\%). Additionally, our approach also improves code generation performance, demonstrating that explicit execution modeling enhances both code reasoning and code generation.

Large Language Models (LLMs) have shown tremendous promise in automated software engineering. In this paper, we investigate the opportunities of LLMs for automatic regression test generation for programs that take highly structured, human-readable inputs, such as XML parsers or JavaScript interpreters. Concretely, we explore the following regression test generation scenarios for such programs that have so far been difficult to test automatically in the absence of corresponding input grammars: bullet Bug finding. Given a code change (e.g., a commit or pull request), our LLM-based approach generates a test case with the objective of revealing any bugs that might be introduced if that change is applied. bullet Patch testing. Given a patch, our LLM-based approach generates a test case that fails before but passes after the patch. This test can be added to the regression test suite to catch similar bugs in the future. We implement Cleverest, a feedback-directed, zero-shot LLM-based regression test generation technique, and evaluate its effectiveness on 22 commits to three subject programs: Mujs, Libxml2, and Poppler. For programs using more human-readable file formats, like XML or JavaScript, we found Cleverest performed very well. It generated easy-to-understand bug-revealing or bug-reproduction test cases for the majority of commits in just under three minutes -- even when only the code diff or commit message (unless it was too vague) was given. For programs with more compact file formats, like PDF, as expected, it struggled to generate effective test cases. However, the LLM-supplied test cases are not very far from becoming effective (e.g., when used as a seed by a greybox fuzzer or as a starting point by the developer).

The dominant industry response to AI-generated code quality problems is to deploy AI reviewers. This paper argues that this response is structurally circular when executable specifications are absent: without an external reference, both the generating agent and the reviewing agent reason from the same artefact, share the same training distribution, and exhibit correlated failures. The review checks code against itself, not against intent. Three hypotheses are developed. First, that correlated errors in homogeneous LLM pipelines echo rather than cancel, a claim supported by convergent empirical evidence from multiple 2025-2026 studies and by three small contrived experiments reported here. The first two experiments are same-family (Claude reviewing Claude-generated code); the third extends to a cross-family panel of four models from three families. All use a planted bug corpus rather than a natural defect sample; they are directional evidence, not a controlled demonstration. Second, that executable specifications perform a domain transition in the Cynefin sense, converting enabling constraints into governing constraints and moving the problem from the complex domain to the complicated domain, a transition that AI makes economically viable at scale. Third, that the defect classes lying outside the reach of executable specifications form a well-defined residual, which is the legitimate and bounded target for AI review. The combined argument implies an architecture: specifications first, deterministic verification pipeline second, AI review only for the structural and architectural residual. This is not a claim that AI review is valueless. It is a claim about what it is actually for, and about what happens when it is deployed without the foundation that makes it non-circular.

Multi-agent LLM systems share state through memory stores, vector indices, and tool registries. We model such sharing as long-running read-generate-write operations under deterministic-generation semantics -- the regime durable-execution engines enforce by deterministic replay -- and formalize four concurrency anomalies in TLA+: stale-generation, phantom-tool, causal-cascade, and tool-effect reordering, structural analogues of classical isolation anomalies, each with a TLC counter-example. The exclusion lattice over these anomalies is trivial; the contribution is the mechanically verified realizability and strict separation of one maximal chain within it, L_0 subsetneq cdots subsetneq L_4, to our knowledge the first machine-checked consistency hierarchy for such runtimes. A development of 274 Verus obligations (zero assume, zero admit; trust base: two structural axioms and a mutex correspondence) proves the detectors sound and complete against the specifications and each runtime its avoidance set. Three deployed Rust runtimes realize L0-L1 (pessimistic locking, serializable snapshot isolation, default-SI), each verified against stale-generation and refined to its state machine; L2-L4 are exec-mode-verified with dependency-free prevention twins (A3, A6, A2: 0/1000 versus 1000/1000), and L2 is run live across three model families (A3 prevented in all 120 retracted sessions). We reproduce a silent lost update in ByteDance's deer-flow, formalizing its fix as a verified L_0 to L_1 refinement, and exhibit tool-effect reordering in LangGraph's ToolNode on unmodified output, removed by an L3 commit-order sequencer. The verified detector, refinements, and realizability artifacts are the contribution; the phenomena and lattice are classical.

Software engineering, whether performed by humans or by AI agents, requires reasoning about how software behaves. We call the internal model that supports such reasoning the software world model, and view current code-execution benchmarks as covering one well-studied slice of it -- control flow. In this paper, we take a step toward a broader evaluation by shifting the observable axis to execution resources: alongside test outcome and exception class, we predict peak memory, wall-clock time, and ranked profiler outputs at method and line granularity. We use SWE-bench Verified as the source of data to hold the test close to real-world software engineering tasks. All tested models, frontier ones included, show modest performance and brittle behaviour, suggesting a notable lack of understanding of how software is executed, as opposed to how its source code is written.

Recent development of large language models (LLMs) for code like CodeX and CodeT5+ demonstrates tremendous promise in achieving code intelligence. Their ability of synthesizing code that completes a program for performing a pre-defined task has been intensively tested and verified on benchmark datasets including HumanEval and MBPP. Yet, evaluation of these LLMs from more perspectives (than just program synthesis) is also anticipated, considering their broad scope of applications in software engineering. In this paper, we explore the ability of LLMs for testing programs/code. By performing thorough analyses of recent LLMs for code in program testing, we show a series of intriguing properties of these models and demonstrate how program testing ability of LLMs can be improved. Following recent work which utilizes generated test cases to enhance program synthesis, we further leverage our findings in improving the quality of the synthesized programs and show +11.77% and +4.22% higher code pass rates on HumanEval+ comparing with the GPT-3.5-turbo baseline and the recent state-of-the-art, respectively.

Open-source libraries and tools are widely reused, but compatibility maintenance is expensive. Once maintainers leave, useful repositories can stop working as runtimes and dependencies evolve. We study whether LLM agents can adapt old repositories to modern environments, a task we call compatibility rescue. Unlike bug repair, compatibility rescue starts from a repository that worked in its original environment but fails after ecosystem drift. RepoRescue gives agents only the repository and its failing modern environment; the agent must diagnose the failure, locate affected code, and produce a source-code rescue that restores the historical test suite. We build RepoRescue from 193 Python and 122 Java repositories, each verified to pass historically and fail after modernization. We evaluate five deployed agent systems on Python and three on Java. Beyond full-patch pass rate, we rerun patches after removing test-file edits to measure source-only repair, add a runtime-enforced regime that blocks test edits, and validate practical use for repositories whose suites pass after rescue. We find that Claude Code systems sometimes edit failing tests even when prompted not to; with runtime blocking, Kimi still rescues 41.5% of repositories. Systems are complementary: their union reaches 62.7%, exceeding the best single system by 10.9 points. Difficulty concentrates in cross-file coordination: on 14 repositories requiring coordinated whole-codebase changes, GPT-5.2 through Codex passes all 14, while every Claude Code system passes at most two. Finally, a passing suite is only an initial signal: among 34 unmaintained Python candidates whose suites pass after rescue, 22 work in realistic scenarios and 12 pass bug-hunt with patches that address the compatibility failure. RepoRescue benchmarks compatibility rescue with source-only auditing, runtime enforcement, practical validation, and reasoning labels.

One of the critical phases in software development is software testing. Testing helps with identifying potential bugs and reducing maintenance costs. The goal of automated test generation tools is to ease the development of tests by suggesting efficient bug-revealing tests. Recently, researchers have leveraged Large Language Models (LLMs) of code to generate unit tests. While the code coverage of generated tests was usually assessed, the literature has acknowledged that the coverage is weakly correlated with the efficiency of tests in bug detection. To improve over this limitation, in this paper, we introduce MuTAP for improving the effectiveness of test cases generated by LLMs in terms of revealing bugs by leveraging mutation testing. Our goal is achieved by augmenting prompts with surviving mutants, as those mutants highlight the limitations of test cases in detecting bugs. MuTAP is capable of generating effective test cases in the absence of natural language descriptions of the Program Under Test (PUTs). We employ different LLMs within MuTAP and evaluate their performance on different benchmarks. Our results show that our proposed method is able to detect up to 28% more faulty human-written code snippets. Among these, 17% remained undetected by both the current state-of-the-art fully automated test generation tool (i.e., Pynguin) and zero-shot/few-shot learning approaches on LLMs. Furthermore, MuTAP achieves a Mutation Score (MS) of 93.57% on synthetic buggy code, outperforming all other approaches in our evaluation. Our findings suggest that although LLMs can serve as a useful tool to generate test cases, they require specific post-processing steps to enhance the effectiveness of the generated test cases which may suffer from syntactic or functional errors and may be ineffective in detecting certain types of bugs and testing corner cases PUTs.

Computer-use agents (CUAs) interact with graphical interfaces through screenshots and low-level mouse and keyboard actions, yet the causal error may precede the terminal failure. We present CUADebug, a framework for localizing root causes in CUA trajectories and guiding re-execution. CUADebug includes a five-category, 30-subtype taxonomy; CUAErrorBench, a benchmark of 204 failed OSWorld trajectories with human root-cause annotations; and CUADebugger, a ReAct-style agent for root-cause analysis (RCA). CUADebugger iteratively selects trajectory steps, inspects paired before/after screenshots and action traces, and submits a structured diagnosis containing the causal step, taxonomy label, grounded evidence, and correction. CUADebugger performs RCA without per-trajectory human intervention; human annotations are used to evaluate RCA predictions and, in controlled re-rollout comparisons, to fix restart points. Task reasoning and control is the largest annotated failure category (110/204). CUADebugger improves L2 and Tag+Step Exact across three debugger backbones on the Claude-agent split; with Gemini 2.5 Pro, Tag+Step Exact rises from 11.1% to 19.4%. Single re-execution improves failure recovery from 13.89% to 29.86% (overall 61.77% to 68.14%); controlled continual re-execution improves it from 12.50% to 25.69% (overall 61.22% to 66.48%). Project page: cuadebug.github.io.

As AI coding agents take on increasingly complex, long-horizon software engineering tasks, existing benchmarks are rapidly saturating and their evaluation quality has come under serious scrutiny: a recent audit found that nearly 60% of unsolved SWE-bench Verified instances contain flawed tests -- either overly narrow tests that reject correct solutions or overly broad tests that check unstated requirements -- and that frontier models can verbatim reproduce gold patches from training data. Code refactoring, which requires coordinated, behavior-preserving changes across many files, offers a substantially harder and more realistic test of agent capability, yet remains underserved by current benchmarks. We introduce SWE-Bench ProMax, an expert-curated, multilingual code refactoring benchmark of 170 instances drawn from real commits across seven programming languages (Python, Java, TypeScript, Go, C, C++, and Rust). Every instance undergoes rigorous, multi-stage curation that directly addresses the quality problems identified in prior benchmarks: issue descriptions are rewritten from scratch to provide precise, unambiguous specifications, and test suites are manually reviewed to remove overly narrow and overly broad tests. Tasks with insufficient complexity or limited cross-file scope are filtered out, yielding a benchmark of challenging, large-scale refactoring tasks that average 11.4 modified files and 261.6 lines of code per instance, substantially exceeding the scale of existing benchmarks. Experiments with frontier models under two agent scaffolds show that the best model achieves only 41.2% resolve rate, confirming that SWE-Bench ProMax presents a meaningful and unsaturated challenge for current AI coding agents. Our benchmark is available at https://huggingface.co/datasets/swe-bench-promax/SWE-Bench-ProMax.

Test-Driven Development (TDD) is a widely adopted software engineering practice that requires developers to create and execute tests alongside code implementation, ensuring that software behavior is continuously validated and refined. In the era of vibe coding, where developers increasingly delegate code writing to large language models (LLMs) by specifying high-level intentions, TDD becomes even more crucial, as test cases serve as executable specifications that explicitly define and verify intended functionality beyond what natural-language descriptions and code context can convey. While vibe coding under TDD is promising, there are three main challenges: (1) selecting a small yet effective test suite to improve the generation accuracy and control the execution workload, (2) retrieving context such as relevant code effectively, and (3) systematically using test feedback for effective code refinement. To address these challenges, we introduce TENET, an LLM agent for generating functions in complex real-world repositories under the TDD setting. TENET features three components: (1) a novel test harness mechanism that selects a concise test suite to maximize diversity of target usage scenarios; (2) a tailored agent toolset that performs efficient retrieval of relevant code with interactive debugging; and (3) a reflection-based refinement workflow that iteratively analyzes failures, replenishes context, and applies code refinement. TENET achieves 69.08% and 81.77% Pass@1 on RepoCod and RepoEval benchmarks, outperforming the best agentic baselines by 9.49 and 2.17 percentage points, respectively. In addition, this is the first study of test-driven code generation with repository-level context, examining how different aspects of test suites affect the performance of LLM agents under the TDD setting.

As Large Language Models shift the programming toward human-guided ''vibe coding'', agentic coding tools increasingly rely on models to self-diagnose and repair their own subtle faults -- a capability central to autonomous software engineering yet never systematically evaluated. We present , the first empirical decomposition that jointly evaluates two coupled tasks: Fault-Triggering Test Generation (FT-Test) constructing a discriminative witness that exposes a latent bug, and Fault-targeted Program Repair (FPR), repairing it under varying diagnostic conditions. pairs competitive programming problems with LLM-generated solutions that pass partial test suites but fail on semantic edge cases, enabling controlled identification of where the diagnostic chain breaks down. Evaluating 12 frontier LLMs, we find that fault-targeted reasoning does not scale with general coding ability. Models produce syntactically valid test inputs at near-ceiling rates yet collapse on discriminative generation, with fault hypothesis generation -- not output validation -- as the dominant bottleneck. Test-guided repair reveals a complementary insight: when self-generated tests successfully witness a fault, the resulting repair matches or outperforms repair guided by externally provided tests, but tests that fail to witness the fault actively degrade repair below unguided baselines. Together, these results reframe the challenge of autonomous debugging: the binding bottleneck is not code synthesis or test validity but fault-target reasoning, a capability that remains deficient across all frontier models. As Large Language Models shift the programming toward human-guided ''vibe coding'', agentic coding tools increasingly rely on models to self-diagnose and repair their own subtle faults -- a capability central to autonomous software engineering yet never systematically evaluated.

Behavioral Co-Versioning remains absent from mainstream practice: while developers routinely version source code with Git, they rarely persist and query how run-time behavior evolves across revisions. This paper argues that this mismatch contributes to a blind spot in software evolution analysis and CI, where rich execution information is discarded and typically reduced to pass/fail outcomes -- despite partial test oracles, flakiness, and silent output or performance drift. We propose Behavioral Co-Versioning, a paradigm that couples the Git history with a Behavioral Archive: an append-only, queryable store of selected run-time observations (e.g., method I/O and performance signals) collected during test runs and keyed by commit and test context. This enables semantic diffing, behavior-aware regression localization, and retrospective auditing by querying historical executions, complementing proactive, signal-specific monitoring tools. We first outline a minimal data model and change diagnostics based on code/test/behavior fingerprints, and then demonstrate feasibility with a laptop-scale prototype that replays historical commits of a Python project, archives run-time observations in a local Parquet-backed store, and detects behavioral changes not apparent from textual diffs.

Computer-use agents (CUAs) increasingly operate in runtimes that combine visual desktop control, command-line execution, code editing, browsers, and external tools. Existing benchmarks, however, often evaluate these interfaces as separable capabilities, leaving long-horizon cross-interface orchestration under-tested. Thus, we introduce WeaveBench, a long-horizon hybrid-interface benchmark with 114 tasks across 8 real-world work domains, grounded in real user requests and publicly verifiable artifacts. Each task requires agents to combine GUI observations/actions with CLI/code operations within a single trajectory. We evaluate these tasks on a real Ubuntu desktop inside deployed CLI-agent runtimes, augmented with a minimal desktop-control plugin. We also propose a companion trajectory-aware judge that inspects deliverables, files, screenshots, logs, and action traces, while detecting shortcut behaviors such as fabricated visual evidence or hard-coded metrics. Across frontier model-runtime pairings, the best PassRate reaches only 41.2%, showing the benchmark remains far from saturated. The trajectory-aware judge further reveals that outcome-only grading substantially overestimates agent performance. Overall, WeaveBench exposes a critical gap in CUA evaluation and provides an effective testbed to measure whether agents can orchestrate GUI, CLI, and code operations across long-horizon real-world tasks.

The hallucination of code generation models hinders their applicability to systems requiring higher safety standards. One critical bottleneck in addressing code hallucination is the difficulty of identifying the functional correctness of generated code, due to its unnatural form. We address this core bottleneck by automatically generating unit tests using dynamic code analysis tools, leveraging the executable nature of code. Accordingly, we propose a selective code generator that abstains from uncertain generations -- based on the functional correctness evaluated by generated unit tests -- to theoretically control the correctness among non-abstained answers, \ie the false discovery rate. Finally, we propose to use generated unit tests in evaluation as well as in learning for precise code evaluation, calling this paradigm FuzzEval. We demonstrate the efficacy of our method along with the controllability of code hallucination and reasonable selection efficiency.

Code clone detection is a critical task in software engineering, aimed at identifying duplicated or similar code fragments within or across software systems. Traditional methods often fail to capture functional equivalence, particularly for semantic clones (Type 4), where code fragments implement identical functionality despite differing syntactic structures. Recent advances in large language models (LLMs) have shown promise in understanding code semantics. However, directly applying LLMs to code clone detection yields suboptimal results due to their sensitivity to syntactic differences. To address these challenges, we propose a novel two-stage framework that combines LLM-based screening with execution-based validation for detecting semantic clones in Python programs. In the first stage, an LLM evaluates code pairs to filter out obvious non-clones based on semantic analysis. For pairs not identified as clones, the second stage employs an execution-based validation approach, utilizing LLM-generated test inputs to assess functional equivalence through cross-execution validation. Our experimental evaluation demonstrates significant improvements in precision, recall, and F1-score compared to direct LLM-based detection, highlighting the framework's effectiveness in identifying semantic clones. Future work includes exploring cross-language clone detection and optimizing the framework for large-scale applications.

AI coding agents are increasingly used to write real-world software, but ensuring that their outputs are correct remains a fundamental challenge. Formal verification offers a promising path: an agent generates code together with a machine-checked proof, guaranteeing that the code satisfies a formal specification. However, there is no guarantee that the formal spec itself matches the user's intent. In this work, we study specification autoformalization: whether LLM agents can translate informal programming problems into faithful formal specifications. We introduce Verus-SpecBench, a benchmark of 581 spec-writing tasks derived from Codeforces problems targeting Verus, a verifier for Rust, and Verus-SpecGym, an agentic environment in which models interact with Verus, bash, & the filesystem to develop these specs. The central challenge is evaluation: expert-written reference specs are expensive to write, & LLM judges can miss subtle mistakes. We address this by (a) extending Verus's exec_spec mechanism so that generated specs can be executed as Rust code, & (b) testing them against official Codeforces tests & adversarial cases extracted from Codeforces "hacks", which are edge cases written by competitors to break incorrect solutions. On Verus-SpecBench, the strongest model, Gemini 3.1 Pro, solves 77.8% of tasks, other frontier models solve 51.1--57.8% & OSS models reach only 21.5--25.5%. Our analysis of failure modes shows that model-generated specs can omit important input assumptions, accept incorrect outputs, & reject valid ones. We also find that LLM-as-a-judge evaluation misses 26% of the failures our evaluator catches. Overall, our results suggest that spec autoformalization is within reach for frontier agents but remains brittle even on problems where they can already generate correct code. The code, data, & logs can be found at https://github.com/formal-verif-is-cool/verus-spec-gym

Executable software engineering data is valuable for training SWE agents, but scaling it remains difficult for two reasons: only a small fraction of real repository changes yield verifiable, high-signal task instances, and naively building repository-specific environments quickly becomes the dominant systems cost. We present SWE-Next, an execution-grounded framework for scalable SWE task and trajectory collection. On the data side, SWE-Next mines real merged pull requests, executes candidate base/merged commit pairs, and retains only those that produce strict test improvements without regressions, yielding self-verifying instances. It also applies strict submission gating so that collected trajectories remain evidence-driven rather than speculative. On the systems side, SWE-Next introduces reusable repo-quarter profiles, which reuse the same environment across nearby commits in time while keeping each task run separate and reproducible. Using only 30 hours and 639GB of environment storage, SWE-Next processes 3,971 seed repositories and 102,582 candidate commit pairs mined from real merged PRs to construct a dataset of 2,308 self-verifying instances. Experiments show that SWE-Next improves downstream pass@1 with fewer or comparable training trajectories, indicating that its gains come not from a stronger trajectory generator, but from higher-signal execution-grounded supervision and more efficient data collection.

Recent advancements in language modeling have enabled the translation of natural language into code, and the use of execution feedback to improve code generation. However, these methods often rely heavily on pre-existing test cases, which may not always be available or comprehensive. In this work, we propose a novel approach that concurrently trains a code generation model and a test generation model, utilizing execution feedback to refine and enhance the performance of both. We introduce two strategies for test and code data augmentation and a new scoring function for code and test ranking. We experiment on the APPS dataset and demonstrate that our approach can effectively generate and augment test cases, filter and synthesize correct code solutions, and rank the quality of generated code and tests. The results demonstrate that our models, when iteratively trained with an increasing number of test cases and code solutions, outperform those trained on the original dataset.

Although agent skills equip LLMs with reusable procedural knowledge, manual maintenance suffers from high costs, unscalability, and misalignment. Real-world deployments thus require autonomous, on-demand skill evolution at test time, constrained by limited interaction budgets and a lack of training or validation sets. This setting introduces a severe sparse reward challenge, where outcomes conflate multiple latent failure causes. Under such ambiguity, existing methods that greedily refine a single incumbent skill are particularly vulnerable to an exploitation trap, allowing early misdiagnoses to exhaust limited trials along unproductive trajectories. To address this, we introduce SkillHEX, a closed-loop framework coupling hypothesis-driven self-verification with evidence-guided tree search. SkillHEX translates falsifiable failure hypotheses into executable tests, producing diagnostic evidence as dense reward without additional environment attempts. This evidence guides a search over persistent skill-revision branches, dynamically balancing the exploitation of supported edits with the exploration of plausible alternatives. Evaluated on 87 tasks from SkillsBench, SkillHEX outperforms existing self-evolving methods and achieves an average pass rate of 55.9% and 57.9% using GPT-5.3-Codex and Claude Opus 4.7 under a five-iteration budget, respectively.

Agent Skills package reusable instructions and assets for tool-using language-model agents. Progressive loading creates failure boundaries poorly represented by session-, model-, or tool-centric traces: a Skill can be discovered but not activated, activated without instructions, or appear successful without an independently verified outcome. We present Skill Runtime Intelligence, a passive runtime-intelligence system that reconstructs supported Skill-lifecycle stages across heterogeneous harnesses while preserving unsupported stages as unknown. Its Run Panorama separates immutable events, deterministic relations, inferred diagnoses, and controlled outcomes with four evidence grades; optional trace import and OTLP/HTTP export support existing observability deployments. Across six frozen repository profiles, three coding agents, and seven clean or fault-injected conditions, all 126 executions preserve source worktrees and each correlates to exactly one source session. Yet adapters expose three distinct semantics: no Skill runs; complete runs but no failure-like events; or failure-like events in every operational-failure and clean session. In a seven-template diagnostic study, semantic aliases and Panorama localize the same six non-clean boundaries but differ in exact/status behavior; both Raw views emit a failure status on all 18 clean cases, while Panorama emits none. A known-rule graph conforms to 126/126 frozen contracts, whereas a second model completes only 228/378 calls. These observations motivate executable adapter qualification and show that event presence is not boundary fidelity, composite exact scores mask distinct errors, and model explanations must not overwrite deterministic facts.

Large Language Models' success on text generation has also made them better at code generation and coding tasks. While a lot of work has demonstrated their remarkable performance on tasks such as code completion and editing, it is still unclear as to why. We help bridge this gap by exploring to what degree auto-regressive models understand the logical constructs of the underlying programs. We propose Counterfactual Analysis for Programming Concept Predicates (CACP) as a counterfactual testing framework to evaluate whether Large Code Models understand programming concepts. With only black-box access to the model, we use CACP to evaluate ten popular Large Code Models for four different programming concepts. Our findings suggest that current models lack understanding of concepts such as data flow and control flow.

Mutation testing is an effective approach to evaluate and strengthen software test suites, but its adoption is currently limited by the mutants' execution computational cost. Several strategies have been proposed to reduce this cost (a.k.a. mutation cost reduction strategies), however none of them has proven to be effective for all scenarios since they often need an ad-hoc manual selection and configuration depending on the software under test (SUT). In this paper, we propose a novel multi-objective evolutionary hyper-heuristic approach, dubbed Sentinel, to automate the generation of optimal cost reduction strategies for every new SUT. We evaluate Sentinel by carrying out a thorough empirical study involving 40 releases of 10 open-source real-world software systems and both baseline and state-of-the-art strategies as a benchmark. We execute a total of 4,800 experiments, and evaluate their results with both quality indicators and statistical significance tests, following the most recent best practice in the literature. The results show that strategies generated by Sentinel outperform the baseline strategies in 95% of the cases always with large effect sizes. They also obtain statistically significantly better results than state-of-the-art strategies in 88% of the cases, with large effect sizes for 95% of them. Also, our study reveals that the mutation strategies generated by Sentinel for a given software version can be used without any loss in quality for subsequently developed versions in 95% of the cases. These results show that Sentinel is able to automatically generate mutation strategies that reduce mutation testing cost without affecting its testing effectiveness (i.e. mutation score), thus taking off from the tester's shoulders the burden of manually selecting and configuring strategies for each SUT.

Visible tests are a common gate for LLM-generated code, but passing them does not certify specification correctness. We study a deployment-like monitoring problem: after code has passed public tests, can a weaker LLM verifier identify the residual hidden bugs? We introduce Code Monitor Red Teaming, a monitor-red-teaming protocol that fixes a public-check information boundary while varying generator pressure, verifier scaffolding, and weak-to-strong capability. We instantiate it as CodeMonitorBench, spanning function-level, data-science, and workflow code. Across 71,000 generated candidates, 43,677 pass public tests and 23,081 of those fail hidden tests. Weak verifiers improve with scaffolding and model family, but still miss most hidden bugs at 5% false-positive rate. As a robustness stress test, adversarial public-test-overfit pressure lowers verifier AUROC and raises low-FPR miss rates in most cells. A GLM-5.1 verifier recovers part of the gap under the same evidence boundary; an inferability audit shows that remaining misses mix verifier failures with M1 evidence limits.

Generative AI is gaining increasing attention in software engineering, where testing remains an indispensable reliability mechanism. According to the widely adopted testing pyramid, unit tests constitute the majority of test cases and are often schematic, requiring minimal domain expertise. Automatically generating such tests under the supervision of software engineers can significantly enhance productivity during the development phase of the software lifecycle. This paper investigates the impact of code context and prompting strategies on the quality and adequacy of unit tests generated by various large language models (LLMs) across several families. The results show that including docstrings notably improves code adequacy, while further extending context to the full implementation yields definitely smaller gains. Notably, the chain-of-thought prompting strategy -- applied even to 'reasoning' models -- achieves the best results, with up to 96.3\% branch coverage, a 57\% average mutation score, and near-perfect compilation success rate. Among the evaluated models, M5 (Gemini 2.5 Pro) demonstrated superior performance in both mutation score and branch coverage being still in top in terms of compilation success rate. All the code and resulting test suites are publicly available at https://github.com/peetery/LLM-analysis.

Background: Some developer activity traditionally performed manually, such as making code commits, opening, managing, or closing issues is increasingly subject to automation in many OSS projects. Specifically, such activity is often performed by tools that react to events or run at specific times. We refer to such automation tools as bots and, in many software mining scenarios related to developer productivity or code quality it is desirable to identify bots in order to separate their actions from actions of individuals. Aim: Find an automated way of identifying bots and code committed by these bots, and to characterize the types of bots based on their activity patterns. Method and Result: We propose BIMAN, a systematic approach to detect bots using author names, commit messages, files modified by the commit, and projects associated with the ommits. For our test data, the value for AUC-ROC was 0.9. We also characterized these bots based on the time patterns of their code commits and the types of files modified, and found that they primarily work with documentation files and web pages, and these files are most prevalent in HTML and JavaScript ecosystems. We have compiled a shareable dataset containing detailed information about 461 bots we found (all of whom have more than 1000 commits) and 13,762,430 commits they created.

The probabilistic reading of the cumulative accuracy profile (CAP) has a long industry lineage. Falkenstein, Boral and Carty (2000) state, in discrete form, that the default rate at a score percentile equals the portfolio average rate times the local slope of the power curve; van der Burgt (2008, 2019) formalizes this as the continuous identity p(Dmid x) = p_D, dy/dx and imports the continuous form as a working fact; Tasche (2009) analyzes the resulting calibration method; Voloshyn and Voloshyn (2023) substitute Bayes' theorem, f(xmid D)=p(Dmid x) f(x)/p_D, into the area integral and write the Gini as a functional of the calibration curve. The slope itself is already in the lineage (van der Burgt's dy/dx is the ratio of the two cumulative differentials), but it enters as a cited working fact, never as Bayes' theorem. We make that identification explicit and draw out its consequences. First, the CAP slope is Bayes' theorem in cumulative coordinates: the standardized PD it recovers is the posterior probability rescaled by the prior. The weight of the paper then falls on two results this reading unlocks. The odds form places the weight of evidence (the log of the likelihood ratio, i.e. the Bayes factor) and the information value inside one geometry (the weight of evidence at a point is the log of the ratio of the "bad" and "good" CAP slopes). The accuracy ratio, Somers' D_{xy}, and the Gini (2A-1)/(1-p_D) are revealed as one number computed three ways. Run in comparison mode (realized outcomes against model claims), the same identity recovers the reliability diagram in cumulative coordinates, with the sign of the gap between the empirical and model-implied Gini coefficients as a calibration diagnostic. A worked five-band example carries every identity in discrete form, and a kernel-density example extends them to the continuous case.

Large Language Models (LLMs) have significantly advanced automated test generation, yet existing methods often rely on ground-truth code for verification, risking bug propagation and limiting applicability in test-driven development. We present ConVerTest, a novel two-stage pipeline for synthesizing reliable tests without requiring prior code implementations. ConVerTest integrates three core strategies: (i) Self-Consistency(SC) to generate convergent test cases via majority voting; (ii) Chain-of-Verification (CoVe) for iterative, reasoning-guided code refinement; and (iii) a Dual Execution Agreement to crossvalidate code and tests through consensus. Experiments on BIGCODEBENCH and LESS BASIC PYTHON PROBLEMS (LBPP) benchmarks demonstrate that ConVerTest improves test validity, line coverage, and mutation scores by up to 39%, 28%, and 18% respectively over baselines. Our findings highlight ConVerTest as a robust solution for mitigating hallucinations and enhancing the reliability of autonomous software testing agents.

Synchronizing production and test code, known as PT co-evolution, is critical for software quality in the software development lifecycle. Existing methods for automatic PT co-evolution either utilize predefined heuristic rules or rely on simple application of machine learning techniques. Due to the limitations of underlying techniques, existing methods either only partially automate PT co-evolution (e.g., only automate obsolete test code identification) or result in low accuracy. In this paper, we propose REACCEPT, a novel approach that leverages large language models and dynamic validation to fully automate PT co-evolution (i.e., capable of both identifying and updating obsolete test cases). REACCEPT relies on experience-based prompt template generation, dynamic validation, and retrieval-augmented generation techniques to accomplish automated PT co-evolution. To evaluate REACCEPT's effectiveness, we extensive experiments with a dataset of 537 Java projects and compared REACCEPT's performance with several state-of-the-art methods. Results show that REACCEPT achieved an update accuracy of 60.16% on correctly identified obsolete test code, surpassing the state-of-the-art technique CEPROT by 90%. This confirms that REACCEPT can effectively assist developers in maintaining test code, improving overall software quality and reducing maintenance effort.

Large language models (LLMs) have been widely applied to assist test generation with the source code under test provided as the context. This paper aims to answer the question: If the source code under test is incorrect, will LLMs be misguided when generating tests? The effectiveness of test cases is measured by their accuracy, coverage, and bug detection effectiveness. Our evaluation results with five open- and six closed-source LLMs on four datasets demonstrate that incorrect code can significantly mislead LLMs in generating correct, high-coverage, and bug-revealing tests. For instance, in the HumanEval dataset, LLMs achieve 80.45% test accuracy when provided with task descriptions and correct code, but only 57.12% when given task descriptions and incorrect code. For the APPS dataset, prompts with correct code yield tests that detect 39.85% of the bugs, while prompts with incorrect code detect only 19.61%. These findings have important implications for the deployment of LLM-based testing: using it on mature code may help protect against future regression, but on early-stage immature code, it may simply bake in errors. Our findings also underscore the need for further research to improve LLMs resilience against incorrect code in generating reliable and bug-revealing tests.

We introduce **SWE-Flow**, a novel data synthesis framework grounded in Test-Driven Development (TDD). Unlike existing software engineering data that rely on human-submitted issues, **SWE-Flow** automatically infers incremental development steps directly from unit tests, which inherently encapsulate high-level requirements. The core of **SWE-Flow** is the construction of a Runtime Dependency Graph (RDG), which precisely captures function interactions, enabling the generation of a structured, step-by-step *development schedule*. At each step, **SWE-Flow** produces a partial codebase, the corresponding unit tests, and the necessary code modifications, resulting in fully verifiable TDD tasks. With this approach, we generated 16,061 training instances and 2,020 test instances from real-world GitHub projects, creating the **SWE-Flow-Eval** benchmark. Our experiments show that fine-tuning open model on this dataset significantly improves performance in TDD-based coding. To facilitate further research, we release all code, datasets, models, and Docker images at [Github](https://github.com/Hambaobao/SWE-Flow).

Predicting program behavior without execution is an essential and challenging task in software engineering. Traditional models often struggle to capture dynamic dependencies and interactions within code. This paper introduces a novel machine learning-based framework called CodeFlowrepresents, which predicts code coverage and detects runtime errors through Dynamic Dependencies Learning. Utilizing control flow graphs (CFGs), CodeFlowrepresents all possible execution paths and the relationships between different statements, offering a comprehensive understanding of program behavior. It constructs CFGs to depict execution paths and learns vector representations for CFG nodes, capturing static control-flow dependencies. Additionally, it learns dynamic dependencies through execution traces, which reflect the impacts among statements during execution. This approach enables accurate prediction of code coverage and identification of runtime errors. Empirical evaluations show significant improvements in code coverage prediction accuracy and effective localization of runtime errors, surpassing current models.

LLMs are increasingly applied to cybersecurity workflows, where they are expected to translate analysts' intent into tool invocations. However, existing evaluations focus on knowledge-based assessments or end-to-end agentic tasks, and do not directly measure LLMs' ability to generate executable commands for real-world cybersecurity tools. This gap is critical because cybersecurity operations rely on strict command-line interfaces (CLIs), where minor syntax errors, incorrect flag--value bindings, or argument misordering can invalidate execution. We introduce KaliBench, a fine-grained benchmark and dataset for natural-language--to--CLI translation on Kali Linux, comprising 8,504 query--command pairs spanning 1,642 tools across 23 capability dimensions and 5 security phases. KaliBench is constructed via a manuscript-grounded pipeline with deterministic canonicalization and alias-aware evaluation, enabling precise and reproducible assessment of tool selection and argument construction. To ensure both semantic correctness and practical executability, we develop a multi-stage verification pipeline that combines LLM-based validation, sandboxed terminal execution, and human-in-the-loop refinement. Building on these fine-grained, deterministic signals, KaliBench further enables runtime-free verifiable rewards for training. Across three evaluation modes and 24 configurations of general-purpose and security-focused open-weight models, no open-weight model exceeds 42% exact-command accuracy in the unrestricted setting, highlighting the difficulty of accurate CLI-based cybersecurity tool use without explicit tool hints. We further show that supervised fine-tuning and reinforcement learning with verifiable rewards derived from KaliBench significantly improve an 8B model and achieve performance comparable to a 685B MoE model.

While large language models have made significant strides in code generation, the pass rate of the generated code is bottlenecked on subtle errors, often requiring human intervention to pass tests, especially for complex problems. Existing LLM-based debugging systems treat generated programs as monolithic units, failing to address bugs at multiple levels of granularity, from low-level syntax errors to high-level algorithmic flaws. In this paper, we introduce Multi-Granularity Debugger (MGDebugger), a hierarchical code debugger by isolating, identifying, and resolving bugs at various levels of granularity. MGDebugger decomposes problematic code into a hierarchical tree structure of subfunctions, with each level representing a particular granularity of error. During debugging, it analyzes each subfunction and iteratively resolves bugs in a bottom-up manner. To effectively test each subfunction, we propose an LLM-simulated Python executor, which traces code execution and tracks important variable states to pinpoint errors accurately. Extensive experiments demonstrate that MGDebugger outperforms existing debugging systems, achieving an 18.9% improvement in accuracy over seed generations in HumanEval and a 97.6% repair success rate in HumanEvalFix. Furthermore, MGDebugger effectively fixes bugs across different categories and difficulty levels, demonstrating its robustness and effectiveness.

Reinforcement learning (RL) has substantially advanced code generation with large language models (LLMs) through executable feedback. The feedback for coding problems mainly comes from specific test cases, where high-quality test cases are often scarce since they should be both sound and discriminative. We thus turn to study the auto-generation of test cases using the learned model. We find this is naturally an adversarial RL problem: the model is expected to generate effective test cases as counterexamples, depending on the solver's current failure modes. We propose Test Cases Scaling (TCS), a two-stage RL framework for effective test generation. Both stages train a test generator from a rolling policy-aligned buffer: Stage 1 generates tests consistent with the reference solution, and Stage 2 restricts the buffer to current failure modes and learns counterexample tests. Across TACO and LiveCodeBench, TCS improves both pass@1 and inference-time answer selection according to generated tests. We find the learned test generator also enables effective selection among other LLM outputs.

Testing is a critical practice for ensuring software correctness and long-term maintainability. As agentic coding tools increasingly submit pull requests (PRs), it becomes essential to understand how testing appears in these agent-driven workflows. Using the AIDev dataset, we present an empirical study of test inclusion in agentic pull requests. We examine how often tests are included, when they are introduced during the PR lifecycle and how test-containing PRs differ from non-test PRs in terms of size, turnaround time, and merge outcomes. Across agents, test-containing PRs are more common over time and tend to be larger and take longer to complete, while merge rates remain largely similar. We also observe variation across agents in both test adoption and the balance between test and production code within test PRs. Our findings provide a descriptive view of testing behavior in agentic pull requests and offer empirical grounding for future studies of autonomous software development.

Large Language Models (LLMs) have shown remarkable performance in automated code generation. However, existing approaches often rely heavily on pre-defined test cases, which become impractical in scenarios where such cases are unavailable. While prior works explore filtering techniques between programs and test cases, they overlook the refinement of test cases. To address this limitation, we introduce CoCoEvo, a novel LLM-based co-evolution framework that simultaneously evolves programs and test cases. CoCoEvo eliminates the dependency on pre-defined test cases by generating both programs and test cases directly from natural language problem descriptions and function headers. The framework employs specialized evolutionary operators, including LLM-based crossover and mutation operators for program evolution, along with a test case generation operator for test case evolution. Additionally, we propose optimization strategies such as a crossover rate scheduler to balance exploration and convergence, and a multi-objective optimization method for test case selection. Experimental results on multiple state-of-the-art LLMs demonstrate that CoCoEvo surpasses existing methods, achieving state-of-the-art performance in automated code generation and testing. These results underscore the potential of co-evolutionary techniques in advancing the field of automated programming.

Code generated by large language models passes security checks at a rate that has barely moved in four years. In regulated backends, the defect classes that matter most are money arithmetic, time handling, retry safety, and access control. Teams answer with instruction files, yet the largest controlled study of instruction files to date found no benefit. This paper tests a narrower idea: generated code improves when the prompt carries a specification, a fixed preamble stating what must be true of the result. We pre-registered hypotheses, refuters, analysis code, and a one-shot generation rule, then ran 50 realistic backend tasks from finance, healthcare, and insurance practice through five frontier models from five vendor lineages, each task twice: bare, and preceded by a 267-word filled specification frame. Nine deterministic AST-based checkers scored the outputs. The Bandit security scanner, which knows nothing of the frame, scored them independently. The frame reduced defects in all five models (mean reduction 0.16 to 0.70 findings per task, every Holm-adjusted sign test significant, every bootstrap confidence interval excluding zero). Where the arms differed, the frame arm won 95 of 100 times. It never made any model worse in any domain. Bandit found 53 medium-or-high issues in the bare arm and 11 in the frame arm, in the same direction for every model. The effect was largest where a model's unprompted defaults were weakest: the frame supplies the discipline a model lacks. All 500 outputs, prompts, checkers, scoring code, and the pre-registration are published with a DOI, so any team can re-derive the result without trusting the author.

Large Language Model (LLM) code agents increasingly resolve repository-level issues by iteratively editing code, invoking tools, and validating candidate patches. In these workflows, agents often write tests on the fly, a paradigm adopted by many high-ranking agents on the SWE-bench leaderboard. However, we observe that GPT-5.2, which writes almost no new tests, can even achieve performance comparable to top-ranking agents. This raises the critical question: whether such tests meaningfully improve issue resolution or merely mimic human testing practices while consuming a substantial interaction budget. To reveal the impact of agent-written tests, we present an empirical study that analyzes agent trajectories across six state-of-the-art LLMs on SWE-bench Verified. Our results show that while test writing is commonly adopted, but resolved and unresolved tasks within the same model exhibit similar test-writing frequencies Furthermore, these tests typically serve as observational feedback channels, where agents prefer value-revealing print statements significantly more than formal assertion-based checks. Based on these insights, we perform a controlled experiment by revising the prompts of four agents to either increase or reduce test writing. The results suggest that changes in the volume of agent-written tests do not significantly change final outcomes. Taken together, our study reveals that current test-writing practices may provide marginal utility in autonomous software engineering tasks.

Recent advancements in software engineering agents have demonstrated promising capabilities in automating program improvements. However, their reliance on closed-source or resource-intensive models introduces significant deployment challenges in private environments, prompting a critical question: How can personally deployable open-source LLMs achieve comparable code reasoning performance? To this end, we propose a unified Test-Time Compute scaling framework that leverages increased inference-time computation instead of larger models. Our framework incorporates two complementary strategies: internal TTC and external TTC. Internally, we introduce a development-contextualized trajectory synthesis method leveraging real-world software repositories to bootstrap multi-stage reasoning processes, such as fault localization and patch generation. We further enhance trajectory quality through rejection sampling, rigorously evaluating trajectories along accuracy and complexity. Externally, we propose a novel development-process-based search strategy guided by reward models and execution verification. This approach enables targeted computational allocation at critical development decision points, overcoming limitations of existing "end-point only" verification methods. Evaluations on SWE-bench Verified demonstrate our 32B model achieves a 46\% issue resolution rate, surpassing significantly larger models such as DeepSeek R1 671B and OpenAI o1. Additionally, we provide the empirical validation of the test-time scaling phenomenon within SWE agents, revealing that models dynamically allocate more tokens to increasingly challenging problems, effectively enhancing reasoning capabilities. We publicly release all training data, models, and code to facilitate future research. https://github.com/yingweima2022/SWE-Reasoner

Code generation techniques generate code snippets automatically based on the problem requirements in natural language. Recently, large language models (LLMs) achieve the SOTA performance on code generation. However, LLMs still struggle at times to generate accurate code, which diminishes their promised efficiency as developers must spend significant effort evaluating and debugging the generated code. To improve the reliability and quality of the generated codes, researchers propose to leverage Consistency to obtain a better code based on generating and ranking multiple candidates. The existing approach is problematic as Consistency thinks a code is better when (1) the code pass more tests (inter-consistency) (2) more codes share the same behavior (intra-consistency). However, because the tests are also generated by LLMs, they could be wrong as well. As a result, majority voting based on testing results is unreliable. Relying solely on consistency is insufficient to address this issue; integrating user feedback is essential for effectively guiding consistency. We show that with minimal human effort, performance can be significantly enhanced. We propose Consistency-Augmented Iterative Interaction Framework to Enhance the Reliability of Code Generation, ConAIR, which is an approach that aims to improve the performance of a code generator through two distinctive ingredients, i.e., (1) lightweight user effort for validating the correctness of selected tests; and (2) a dynamic strategy for ranking, localizing and correcting multiple tests and codes. Overall, we propose a lightweight interaction framework that incorporates user feedback to correct identified tests and guide the iterative process. The iteration rounds are only 4 in average with the help of consistency. With only lightweight human efforts, we can achieve an improvement of 33% towards the base model.

Testing plays a crucial role in the software development cycle, enabling the detection of bugs, vulnerabilities, and other undesirable behaviors. To perform software testing, testers need to write code snippets that execute the program under test. Recently, researchers have recognized the potential of large language models (LLMs) in software testing. However, there remains a lack of fair comparisons between different LLMs in terms of test case generation capabilities. In this paper, we propose TESTEVAL, a novel benchmark for test case generation with LLMs. We collect 210 Python programs from an online programming platform, LeetCode, and design three different tasks: overall coverage, targeted line/branch coverage, and targeted path coverage. We further evaluate sixteen popular LLMs, including both commercial and open-source ones, on TESTEVAL. We find that generating test cases to cover specific program lines/branches/paths is still challenging for current LLMs, indicating a lack of ability to comprehend program logic and execution paths. We have open-sourced our dataset and benchmark pipelines at https://llm4softwaretesting.github.io to contribute and accelerate future research on LLMs for software testing.

Recent large language models (LLMs) can operate as coding agents that build complete games from natural language requests. Game development is especially demanding because program logic, visual and audio content, interfaces, interaction and playability must function together in one executable artifact. Measuring this capability therefore requires evaluation of both game product and the development process. Existing benchmarks often assess the game development capabilities of LLMs by evaluating the final artifact or an isolated development stage. Our analysis of complete human-agent development trajectories identifies three stages that together span the lifecycle of game development with a coding agent: initial game generation, bug diagnosis and repair, and optimization over multiple turns. Therefore, we introduce GameXpert-Bench, which operationalizes the three lifecycle stages as three complementary benchmark tracks. GameGen evaluates complete game creation from a single request in an empty workspace. GameFix evaluates diagnosis and repair when defects are reported or left for the agent to discover. GameOpt evaluates cumulative optimization through request chains seeded by real development trajectories between users and agents. We evaluate each track using live game interaction, deterministic behavioral tests, or final product criteria with regression checks. The suite contains 97 generation tasks across 11 genres; 100 repair tasks from 50 game levels verified by humans, each with 19-27 injected bugs; and 17 optimization chains with six turns and 102 requests. Across the three tracks, current agents are more reliable at producing playable foundations and implementing explicit requirements than at discovering defects, verifying runtime behavior, and preserving functionality across changes.

Large language models (LLMs) have shown promise for automated unit test generation, but existing evaluations largely rely on standalone settings and a narrow set of programming languages, overestimating real-world readiness. We introduce XREPOTEST, a multilingual repository-level benchmark for unit test generation spanning five underexplored languages: Rust, Go, Julia, PHP, and Ruby. XREPOTEST evaluates tests under realistic repository constraints using a containerized execution framework and multiple context augmentation strategies, including file-level, LSP-based, and retrieval-based context. Beyond standard metrics such as test pass rate and coverage, we propose Invocation Rate (IR) to assess whether generated tests meaningfully exercise the intended functionality. Experiments with 14 state-of-the-art LLMs, including Claude 4.5, GPT-5.2, DeepSeek V4-Pro, and Qwen families, reveal a substantial gap between standalone and repository-level performance, as well as trade-offs between richer context and test reliability. Overall, XREPOTEST provides a challenging and informative benchmark to advance scalable and robust unit test generation in realistic software environments. The dataset and code are publicly available at: https://github.com/solis-team/XRepoTest